1) supersonic dispersed oil
超声分散油
2) ultrasonic dispersion
超声分散
1.
The contact mass prepared with ultrasonic dispersion method was proved to hold higher activity than that of prepared with simple mixing method.
采用简单混合法和超声分散法2种催化剂触体制备方法,将自制铜粉与适量的氧化锌助催化剂混合,由直接法合成甲基氯硅烷,并建立了毛细管气相色谱法定量分析甲基氯硅烷的方法。
2.
A PVDF/Polyacrylate composite emulsion was prepared by emulsion polymerization using mixture of polyvinylidene fluoride,methyl methacrylate and butyl acrylate monomers in presence of fluorine-containing surfactant by ultrasonic dispersion process.
在含氟表面活性剂存在下,将聚偏氟乙烯超声分散于甲基丙烯酸甲酯和丙烯酸丁酯的混合单体中进行乳液聚合,制备了聚偏氟乙烯/聚丙烯酸酯复合乳液。
3.
The influence of ultrasonic dispersion time,seed type and DVB concentration were discussed.
利用超声分散改进的二步溶胀法制备4~9μm的聚苯乙烯-二乙烯苯(PSt-DVB)多孔微球,并以防晒剂parsol 1789为模型组分考察了其缓释性能。
3) Ultrasonic dispersion
超声波分散
1.
Ni-based nano-composite coatings with nano-Si3N4 particles were prepared on pure copper matrix by using ultrasonic dispersion technique plus magnetic stirrer technique.
采用超声波分散加机械搅拌技术在纯铜板上制备了含有纳米Si3N4颗粒的镍基纳米复合镀层,研究了分散方式对复合镀层中纳米颗粒含量、复合镀层组织结构、显微硬度和磨损性能的影响。
2.
And dispersion effects on fibrous brucite were compared using ultrasonic dispersion and mechanism dispersion.
试验研究了不同类型的分散剂、不同加入量以及不同的搅拌速度和搅拌时间对纤维水镁石的分散效果,并且对超声波分散与机械分散效果进行了比较。
3.
Nano-MgO was surface modified under ultrasonic dispersion using titanate coupling agent as modifier.
以钛酸酯偶联剂为改性剂,采用超声波分散的方法对纳米氧化镁(MgO)进行了表面改性。
4) ultrasonic technique
超声分散法
1.
Objective To prepare solid lipid nanoparticles containing praziquantel(PZQ-SLN) by ultrasonic technique,and investigate the main factors in the process of preparing PZQ-SLN.
目的采用超声分散法制备吡喹酮固体脂质纳米粒,并考察制备过程中的主要影响因素。
2.
Aim To prepare solid lipid nanoparticles (SLN) loaded with all-trans retinoic acid using an ultrasonic technique with Compritol 888 ATO as matrix material, and investigate properties of nanoparticles in vitro and in vivo.
目的 以山嵛酸甘油酯(Compritol888ATO)为脂质材料,采用超声分散法制备维甲酸固体脂质纳米粒,并考察其体内外性质。
5) ultrasonic vibration
超声波分散
1.
The attapulgite was dispersed in the water by stirring and ultrasonic vibration, observing the shape of the attapulgite with TEM after the process.
采用超声波分散方法将凹凸棒土(简称凹土AT)在水中进行分散,然后用硅烷偶联剂KH570对凹凸棒土纳米棒晶进行表面处理,采用X射线光电子能谱(XPS)对表面结构进行了表征。
2.
The attapulgite was dispersed in the toluene by stirring and ultrasonic vibration, and then was treated with a silane coupling agent KH570 and in situ graft polymerization of methyl methacrylate on the AT surface.
利用超声波分散处理凹凸棒土,分别采用硅烷偶联剂KH570对其进行表面修饰和溶液聚合法在修饰后的凹土表面原位接枝聚合MMA单体,将经上述处理的凹土与LDPE(低密度聚乙烯)复合制备LDPE/AT纳米复合材料。
3.
Attapulgite was dispersed in toluene via stirring and ultrasonic vibration, and subsequently treated with a silane coupling agent KH570.
采用超声波分散方法将凹凸棒土 (AT)在甲苯中进行分散 ,然后采用硅烷偶联剂KH5 70对凹凸棒土纳米棒晶进行表面处理 ,将经上述处理的凹凸棒土与低密度聚乙烯 (PE LD)复合制备纳米粒子复合材料 ,研究了纳米粒子复合材料的晶体结构与性能。
6) Ultrasonic dispersion system
超声分散系统
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条