说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 糙面
1)  rough surface
糙面
2)  rough surface
粗糙表面
1.
The lubrication mechanism of floating-rig journal bearings under rough surface;
粗糙表面下牙轮钻头浮动套轴承润滑机理研究
2.
Study of measurement system for rough surface accuracy;
粗糙表面精度测量系统的研究
3.
High-order kirchhoff approximation for gaussian dielectric rough surface electromagnetic scattering;
高斯介质粗糙表面电磁散射的高阶基尔霍夫法
3)  surface roughness
表面粗糙
1.
In the article,the surface roughness of Oriented Strand Board has been researched from the air forming,applying the surface fine material to improve the board-surface smooth.
本文对定向结构刨花板表面粗糙问题从工艺和设备上进行深入的研究 ,通过气流铺装施加表面细化材料以提高板面平整度。
2.
Simulation of Surface Roughness and Processing Fault Effects on Microchannel Flows;
本文在前人的基础上,对微槽道表面粗糙度和加工缺陷对流动的影响作了数值模拟。
4)  rough surfaced rubber covering
糙面橡皮
1.
Highlight is given to the structure and the application of rough surfaced rubber covering NYCO.
着重介绍了NYCO糙面橡皮的结构特点与应用 ,通过与国外产品的物理机械性能对比分析 ,说明了NYCO糙面橡皮的质量可靠性 ;另外推荐了粘接用粘合剂和粘接方法 ,便于用户的选择和使
5)  rough surface
粗糙面
1.
Electromagnetic scattering interaction between a conducting plate and 1D slightly rough surface;
一维微粗糙面与其上方金属平板的复合电磁散射研究
2.
Study on the multiple scattering and shadowing effect from the two-dimensional rough surface;
二维粗糙面的多次散射和遮蔽效应研究
3.
Modification of the curvature in physical optics approximation for rough surface scattering;
糙面散射物理光学近似条件中的曲率修正
6)  rough surfaces
粗糙表面
1.
Some researchers studied normal contact stiffness between rough surfaces in theory, their researches, however, are all based on the statistically describing results of the micro profile of rough surfaces.
指出了以往有关粗糙表面法向接触刚度理论研究工作的缺陷与不足 ,并在一定的前提假设下 ,基于球体与平面的接触理论和粗糙表面的分形接触理论 ,从理论上给出了具有尺度独立性的粗糙表面法向接触刚度分形模型 ,并进行了数字仿真研究。
2.
Scattering from 1 dimensional random rough surfaces with varying roughness was investigated by numerical integration based on Kirchhoff approximation.
本文在Kirchhof近似基础上,利用数值积分方法分析了一维随机粗糙表面的散射特征。
3.
In order to study the PIM power level as a function of the tightness of the junction, the roughness of the waveguide surface, the thickness of the oxide layer on the metal surface and the input carrier power, firstly developed an equivalent ciurcuit model based on the rough surfaces contact model and then calculated the third order PIM power level using power series method.
基于粗糙表面接触模型建立了MIM结构的等效电路模型,然后采用幂级数法计算三阶PIM功率,研究了波导连接的紧固度、波导表面的粗糙度、波导金属表面的氧化层厚度及输入载波的功率对PIM功率的影响。
补充资料:不看金面看佛面
1.同"不看僧面看佛面"。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条