1) service bench
操作走台
2) coasting operation
惰走操作
3) operating corridor
操作走廊
4) operating board
操作台面
1.
The paper uses the ergonomics theory to analyze the shearer operating board and redesign the operating device to reduce the probability of misoperation and improve the productive efficiency of shearer.
运用人机工程学的理论,对采煤机操作台面进行分析研究,对操纵器进行重新设计,以降低误操作概率,提高采煤机的生产效率。
5) operating platform
操作平台
1.
Application of stress and flexibility measurement in estimating of loading capacity for steel structure operating platform
应变及挠度测量在钢结构操作平台承载评估中的应用
2.
Combined with practical engineering,the author proposes improvement project of using slip-form devices to be separated from operating platform,analyzed this project,introduces the construction elements of slip-form system,and show by practices that it has well economic benefits and effectively solves the construction problems,which is worthy to be popularized.
结合工程概况,提出采用滑模装置与操作平台分离的滑模装置的改进方案,并对该方案进行了分析论证,介绍了滑模系统的施工要点,实践表明,技术经济效益良好,并有效地解决了施工问题,值得推广。
3.
During the second-stage construction of 240 m chimney-group of the BeiLungang Power Plant,the lifting frame of the operating platform of the electro-lifting formwork system,and the lifting-machine transmission equipment,both of them are the keys of the electro-lifting formwork technology.
北仑港发电厂二期２４０ｍ集束式烟囱施工中，操作平台电动提升系统的提升架与提升机械传动装置是电动升模的关键，将提升架设计为一个大刚度的几何不变体，提升架通过滚轮套合于操作架内侧的槽钢上，与之互为轨道，交替上升。
6) operation platform
操作平台
1.
Development and application of seismic acquisition SPS operation platform
地震采集SPS操作平台的开发与应用
2.
This article mainly aimed at introducing the type and design procedure of the operation platform as well as the factors affecting the design.
本文主要阐述了操作平台的类型和设计步骤 ,以及在各设计步骤中需要考虑的因素。
3.
Using WindowsXP as the operation platform and Auto CAD2002 as the drawing support software,the skill of original programme debugging was also supplemented.
为此,以WindowsXP为操作平台,以AutoCAD2002为图形支撑软件,以实例的形式介绍了AutoCAD支持的二次开发工具—VisualLISP的使用,并对源程序的调试技巧进行了补充。
补充资料：K9225水压试验台操作规程
1、遵守铸设备通用操作规程。
2、检查所有的密封堵塞件是否完好，如有损坏，应于更换。
3、逐个操纵各伐门手柄进行试车，检查管路系统是否有漏气漏水现象，确认一切正常后，方可进行生产。
4、在吊运缸体过程中，不要碰撞设备，注意人身安全。
5、工作以后，缸体要吊离设备，不要停放在试验台上。
2、检查所有的密封堵塞件是否完好，如有损坏，应于更换。
3、逐个操纵各伐门手柄进行试车，检查管路系统是否有漏气漏水现象，确认一切正常后，方可进行生产。
4、在吊运缸体过程中，不要碰撞设备，注意人身安全。
5、工作以后，缸体要吊离设备，不要停放在试验台上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条