1) glass web
玻璃(纤维)网布，玻璃(纤维)毡
2) glass mat
玻璃纤维毡
1.
The preparation and properties of glass mat/polypropylene composite were introduced as well as the techniques and properties of the mold in the application for concrete wall material.
论述了玻璃纤维毡/聚丙烯复合材料的制备和片材性能,及用它制造墙体模具的工艺和性能。
2.
In this paper, we present briefly process, properties and application of glass mat reinforced nylon sheet.
本文简单介绍玻璃纤维毡增强尼龙薄片的成型工艺、性能和应用。
3) glass fiber mat
玻璃纤维毡
1.
For the balance between stiffness and toughness of polypropylene composites which filled by glass fiber mat, the compatibilizing mechanism and effect of silane grafted polypropylene on GMT-PP performed were studied.
为了获得高刚性和高韧性的玻璃纤维毡增强聚丙烯(GMT-PP),首先制备了硅烷接枝聚丙烯(PP-g-Si),研究了PP-g-Si对GMT-PP的增容作用及增容机理。
2.
The types of glass fiber mats and their configuration strongly affect the melt impregnation, void content, mechanical properties of GMT sheets, and the loft ratio of sheets during the preheating process.
玻璃纤维毡种类及其结构对熔体浸渍、片材孔隙率、力学性能及预热膨化有着很大影响。
3.
In this paper, the application, properties and study of glass fiber mat reinforced nylon sheet (GMT) are presented briefly.
简单介绍玻璃纤维毡尼龙复合片材的研制,性能和应用。
5) fiberglass mesh
玻璃纤维网布
1.
Preparation and application of acrylic ester emulsion for fiberglass mesh;
玻璃纤维网布用丙烯酸酯乳液的制备及应用研究
2.
Preparation of modified acrylic emulsion with modified monomers, crosslinking agents and reactive surfactants, and their performance on fiberglass mesh and surface protective film were investigated in this study.
本文使用改性单体、交联剂、反应性乳化剂等来制备丙烯酸乳液,并研究丙烯酸乳液在玻璃纤维网布和表面保护膜上的应用及对它们的性能影响。
6) Fiberglass mesh
玻璃纤维网格布
1.
Fiberglass mesh should have properties such as softness,high strength and good alkali-resistivity as reinforced materials in concrete.
玻璃纤维网格布作为水泥增强材料,需要其具有柔软、定位好、强度高及耐碱腐蚀的优点,现有的玻璃纤维网格布用丙烯酸酯乳液涂层存在着“热黏冷脆”、强度及耐碱保留率不高的缺点。
2.
So more and more fiberglass mesh were applied in architecture,but the mesh was corrupted by alkali from cement and the strength of fiberglass was poor.
玻璃纤维网格布具有耐高温、强度高、比重轻、吸湿低及延伸小等优异特性,使其在建筑方面的应用日益增多,但是玻璃纤维网格布容易受到水泥中碱性介质的浸蚀,而使网布的强度下降。
补充资料：玻璃纤维增强聚甲基丙烯酸甲酯透明玻璃钢
分子式：
CAS号：
性质： 玻璃纤维增强的有机玻璃。具有好的机械强度，冲击强度可比普通有机玻璃高5～10倍，半透明、耐光耐候性优良。制法与铸型本体聚合制有机玻璃相似，在模具中每铺一层玻璃纤维，浇一层甲基丙烯酸甲酯预聚浆料，使其充分浸润，最后密封后加热固化脱模。主要用作建筑材料，如遮阳板等。
CAS号：
性质： 玻璃纤维增强的有机玻璃。具有好的机械强度，冲击强度可比普通有机玻璃高5～10倍，半透明、耐光耐候性优良。制法与铸型本体聚合制有机玻璃相似，在模具中每铺一层玻璃纤维，浇一层甲基丙烯酸甲酯预聚浆料，使其充分浸润，最后密封后加热固化脱模。主要用作建筑材料，如遮阳板等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条