1) non-circularity of cladding
包层不圆度
2) fiber cladding noncircularity
光纤包层不圆度
1.
Study on the relationship between fiber cladding noncircularity and PMD;
光纤包层不圆度与偏振模色散间关系的研究
3) multi elliptical claddings
椭圆多包层
4) out-of-roundness
不圆度
1.
Thevariation laws of the thickness irregularity andout-of-roundness of the tube while expanding are investigated.
模拟井眼中的钻井实体膨胀管膨胀时的力学环境 ,选用 35CrMo钢管 ,对实体膨胀管在 5种不同膨胀幅度下的管子壁厚不均度及不圆度的变化规律进行了试验研究。
2.
This paper specifically analyzes the philosophy of requirements of permissible out-of-roundness for shells, of shape tolerance for heads, and of alignment tolerance for sections at edges to be welded which are specified by ASME Boiler and Pressure Vessel Code.
本文对ASME锅炉及压力容器规范中壳体许用不圆度规定、封头形状误差规定、待焊对接截面对准误差规定等逐一进行分析。
5) out of roundness
不圆度
1.
Through designing for finishing pass and ana lysing for rolling shaped of round bar,puts forward reasonable determining metho d for out of roundness of round bar produced by national standard and the devel oping trend of round bar finishing pass design.
通过对圆钢成品孔型成熟设计和轧制成型的分析,提出了国标圆钢不圆度较合理的测定方法以及圆钢成品孔型设计的发展趋势。
2.
It makes an overall analysis of the tread damage(flaking)and the occurrence of the wheel out of roundness in terms of the wheel skidding load and the wheel material,and finally puts forward the measures to be taken to avoid or reduce the wheel damage.
从车轮打滑负荷和材料两方面对踏面损伤 (剥落 )和车轮不圆度的形成作了较全面分析 ,然后提出了避免或减少车轮损伤的措
6) non-circularity
不圆度
1.
The effects relating to variable structure types on the sound radiation were observed,the non-circularity of double cylindrical shell was also investigated on vibration and sound radiation from underwater stru.
同时研究了圆柱壳不圆度对结构振动和声辐射的影响,结果表明圆柱壳不圆度的存在,一定程度上加强了水下结构的振动,且壳体截面的不圆度越大,结构的辐射声功率越大。
2.
The results show that,with an increasing internal pressure,non-circularity of the tube decreases,and the tendency of thickness thinning on inner and out side of the tube increases,respectively.
失稳起皱和截面畸变是薄壁管弯曲成形过程中的主要缺陷,通过数值模拟和实验的方法,研究了液压支承下管材的弯曲变形行为,进行了从无内压到内压为18MPa的管材充液弯曲成形,分析了充液弯曲成形过程中的内压值对成形的影响,给出了成形后的不圆度和典型点壁厚减薄率的变化规律,结果显示,随着充液压力的增加,管材的截面不圆度逐渐减小,管材内侧壁厚增厚趋势减小,外侧壁厚减薄趋势增大。
补充资料：包层式传动带
分子式：
CAS号：
性质：又称包边式传动带。一种平型传动带。由里芯布、包芯布、封口胶条、覆盖胶组成。分带覆盖胶和无覆盖胶两种类型。适合于中等运转速度。也适宜在连续受沉重负荷的传动设备上使用。使用寿命和耐屈挠性能较叠层式传动带差，边缘有较好的抗摩擦性能。可将裁好的胶布，通过成型机包边后，经硫化而制成。
CAS号：
性质：又称包边式传动带。一种平型传动带。由里芯布、包芯布、封口胶条、覆盖胶组成。分带覆盖胶和无覆盖胶两种类型。适合于中等运转速度。也适宜在连续受沉重负荷的传动设备上使用。使用寿命和耐屈挠性能较叠层式传动带差，边缘有较好的抗摩擦性能。可将裁好的胶布，通过成型机包边后，经硫化而制成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条