1) fused-salt reactor
[核]熔盐难
2) molten salts
熔盐
1.
Y2O3∶Eu red phosphor was prepared by co-precipitation-molten salt baking method,and the effects of complexing agents(EDTA,citric acid and ammonia,or starch),precipitation temperature,and molten salts were investigated on the luminescent properties,particle size and morphology.
采用共沉淀-熔盐焙烧法制备了Y2O3∶Eu红色荧光粉,研究分析了EDTA、柠檬酸+氨水、淀粉等3类络合剂、沉淀温度及熔盐对其发光性能、粒度及形貌等的影响。
2.
Compared principle and development of the traditional method with that of the new method,it pointed out the direction of titanium dioxide to titanium in molten salts was a green technology with lower consumption and without pollution.
介绍了熔盐电解法制备金属钛的研究进展,对比传统熔盐电解法和新熔盐电解法的基本原理以及发展状态,指出二氧化钛的直接电化学还原法是一种低能耗、无污染的绿色生产新工艺,最有希望取代传统的Kroll法。
3.
Molecular dynamic simulations have been done for NaF-NaCl and KF-KCl molten salts system.
用分子动力学模拟方法研究了NaF—NaCl和KF—KCl熔盐系在氯化物一端1000℃的混杂过程。
3) molten salt
熔盐
1.
Preparation of AB_5 type hydrogen storage alloy by direct electro-deoxidization in molten salt;
熔盐电脱氧法制备AB_5型储氢合金的研究
2.
A Study on the Structure of Calcium Nitrate Tetrahydrate Molten Salt;
四水硝酸钙熔盐的结构研究
3.
Study on pyrolysis and liquification of polypropylene in molten salt;
熔盐法热解液化聚丙烯的研究
4) fused salt
熔盐
1.
The process of Covering Cr12MoV steel with Carbides in fused salt was studied.
本文研究了Cr12MoV钢在熔盐中的碳化物覆层技术 ,介绍了覆层工艺方法 ,探讨了该工艺的机理 ,测试了碳化物覆层的性能。
2.
Making Y-Al alloy by electrolysing rare earth oxides in fluoride fused salt system is a newresearch topic.
在氟化物熔盐体系中，电解稀土氧化物获得稀土合金是一个新颖的研究课题。
3.
This paper presents the use of fused salt method to determine and calibrate the probe temperature of a platinum coil pyrolyzer, that is, according to the fact that each salt has a definite fusing point.
阐述了热丝型裂解器在使用过程中及探头温度校准方面所遇到的一些问题，提出了用熔盐法测定及校准热丝型裂解进样器探头温度的方法。
5) nugget
[英]['nʌɡɪt] [美]['nʌgɪt]
熔核
1.
Analysis of nugget formation process in resistance spot welding based on magnetic fluid dynamics theory;
电阻点焊熔核形成过程磁流体动力学分析
2.
The micro joint consists of nugget zone, semi-melt zone and heat affect zone.
微型接头由熔核区、半熔化区及热影响区组成,熔核为以细密β’-Cu5。
3.
The instantaneity of RSW process make it difficult to experiment research of the nugget growth process and it is unbelievable to only numerica.
所以本文采用数值模拟和少量的试验验证相结合的方法对铝合金点焊熔核形成过程机理进行了研究,分析了铝合金点焊过程中的力、热、电耦合行为,为解决铝合金电阻点焊质量问题提供理论依据。
6) refractory metals
难熔金属
1.
Molecular dynamics study of the melting point for refractory metals (Vanadium,Niobium, and Tantalum);
分子动力学研究难熔金属(V、Nb和Ta)熔点
2.
This paper reviews the conventional fused salt electrolysis process for production of refractory metals and analyzes its shortages: conventional electrolysis has strict demands for electrolyte, which leads failure in production of refractory metals with conventional electrolysis.
介绍了传统的熔盐电解法用于难熔金属制备的应用现状,分析了其存在的弊病:主要是传统熔盐电解法对电解质要求严格,难以找到合适的熔盐。
3.
The present status of research and application of ultra-high temperature materials such as refractory metals,ceramic matrix composites and carbon/carbon composites were summarized.
综述了难熔金属、陶瓷基复合材料及炭-炭复合材料等超高温材料的研究和应用现状,分析了目前存在的问题,提出了今后的研究方向。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条