1) longitudinal shear strength
纵向剪切强度
2) longitudinal shearing strength of high/low temperature
高、低温纵向剪切强度
1.
To start from composites mechanics and effective moment of inertia of insulating aluminum alloy profile and combine structure state of composites,the significance to use regular insulating materials and longitudinal shearing strength of high/low temperature of insulating aluminum alloy profile were described.
从复合材料力学及隔热型材有效惯性矩计算入手,结合复合材料及其构件的结构状态,论述了采用合格的隔热材质,隔热型材内外铝材及其高、低温纵向剪切强度及啮合工艺的重要性,以及采用合格的隔热材质及其型材工艺等对其质量的影响,并对加强铝合金隔热型材产品的质量进行了探讨。
3) longitudinal shear
纵向剪切
1.
The bifurcated cracks problem in circular region in the case of elastic longitudinal shearing was investigated by using dislocation analysis method.
采用位错分析法,研究弹性纵向剪切情况下圆域中分叉裂纹问题。
2.
According to the fundamental theory of elasticity , the Newmann problem of the rectangular region with longitudinal shear load is set up ;The Fourier series of load is given by using generalized step function and the displacement formula of the longitudinal shear problem is derived .
根据弹性力学的基本原理 ,建立了矩形域在边界上受纵向剪切载荷的牛曼 (New mann)问题 ;应用广义阶梯函数来表示载荷 ,然后再将其展开成傅立叶级数形式 ,推导出纵向剪切问题的位移计算公式 。
3.
The branch cracks problems of circular region in elastic longitudinal shear are investigated by the dislocations analysis method.
采用位错分析法,研究弹性纵向剪切情况下圆域中分叉裂纹问题。
4) shear strength
剪切强度
1.
On shear strength testing method of explosion cladding joint;
爆炸复合接头剪切强度测试方法研究
2.
Effect of magnetic field on shear strength of adhesively bonded single lap joint;
外加磁场对粘接接头剪切强度的影响
3.
Interfacial reaction and shear strength of Sn-Zn-Cu/Cu joints;
Sn-Zn-Cu/Cu界面反应及剪切强度
5) shearing strength
剪切强度
1.
The adjusted shearing strength formula of rough rock joint;
粗糙岩石节理剪切强度的修正公式
2.
Effect of rosin contents of lead-free solder paste on the shearing strength of the weld spot;
无铅焊膏中松香含量对焊点剪切强度的影响
3.
Study of the shearing strengths of marine sediment in the China’s mining region;
海底沉积物剪切强度的试验研究
6) shear bond strength
剪切强度
1.
Effect of different surface conditioning on shear bond strength of different types of luting cements to ceramics;
瓷表面不同处理方法及粘结剂对全瓷剪切强度的影响
2.
Study of shear bond strength of light-cured and resin-reinforced glass ionomer cement immediately after bonding;
光固化树脂加强型玻璃离子水门汀即刻剪切强度的测定
3.
Comparative study on the shear bond strength of light-cured glass ionomer cement between etching and nonetching;
酸蚀对树脂加强型玻璃离子抗剪切强度的影响
补充资料：纵向剪切强度
分子式：
CAS号：
性质：平行于粘接面施加应力，使黏合接头破坏所需要的力。有时就直接称之为搭接接头强度(1ap joint strength)。这是测量粘接材料粘接能力的一种试验。把规定材质、尺寸和加工面要求的二片试样用受试粘接材料将其搭接，然后在试验机上测其破坏所需的力。具体的试验要求要根据标准试验方法的规定。
CAS号：
性质：平行于粘接面施加应力，使黏合接头破坏所需要的力。有时就直接称之为搭接接头强度(1ap joint strength)。这是测量粘接材料粘接能力的一种试验。把规定材质、尺寸和加工面要求的二片试样用受试粘接材料将其搭接，然后在试验机上测其破坏所需的力。具体的试验要求要根据标准试验方法的规定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条