1) pentaerythritol tetraacrylate
季戊四醇四丙烯酸酯
2) pentaerythritol tetraacrylate
四丙烯酸季戊四醇酯
3) pentaerythritol triarylate
季戊四醇三丙烯酸酯
1.
The resin which was synthesized by the materials of hydroxy silicone oil, 1, 6-hexamethylene diisocyanate, tolylene diisocyanate, pentaerythritol triarylate and 2-hydroxy ethyl acrylate is able to cure rapidly at room temperature by UV.
本实验采用溶液聚合的方法,以端羟基硅油、甲苯二异氰酸酯、六亚甲基二异氰酸酯、丙烯酸—2—羟基乙酯和季戊四醇三丙烯酸酯为原料制备出了新型能够进行快速固化、高效的三官能度封端的光固化反应体系。
4) dipentaerythritol pentaacrylate
双季戊四醇五丙烯酸酯
1.
Synthesis and characterization of dipentaerythritol pentaacrylate;
双季戊四醇五丙烯酸酯的合成及表征
5) dipentaerythritol hexaacrylate
双季戊四醇六丙烯酸酯
1.
Synthesis of dipentaerythritol hexaacrylate;
双季戊四醇六丙烯酸酯的合成
6) pentaerythritol triacrylate
季戊四醇三丙烯酸酯
1.
The hydroperoxidized polypropylene(HPP) was prepared by oxidizing polypropylene (PP),then monomers of pentaerythritol triacrylate(PETA) and styrene(St) were impregnated into HPP by the aid of supercritical carbon dioxide(SC CO_2),and were grafted onto the microporous HPP backbone through thermal cleavage of hydroperoxides.
采用氧化法制备氢过氧化聚丙烯(HPP),然后用超临界二氧化碳(SC CO_2)将单体苯乙烯(St)和季戊四醇三丙烯酸酯(PETA)溶胀到HPP颗粒内,再通过热引发将单体接枝到HPP上。
2.
A new type multifunctional waterborne UV-curing polyurethane acrylate emulsion(PUA) with core-shell structure was synthesized from isophoronediisocyanate(IPDI),polytetrahydrofuran glycol(PTMO),dimethylolpropionic acid(DMPA),pentaerythritol triacrylate(PETA).
以异佛尔酮二异氰酸酯(IPDI)、丙三醇、聚四氢呋喃醚二醇(PTMO)、二羟甲基丙酸(DMPA)、季戊四醇三丙烯酸酯(PETA)为原料,合成了一种具有核壳结构的新型多官能度水性光敏聚氨酯丙烯酸酯(PUA)乳液。
3.
The multifunctional waterborne UV-curing polyurethane acrylate emulsion was synthesized from isophorone diisocyanate(IPDI),glycerol poly(tetramethyleneglycol)(PTMG),dimethylol propionicacid(DMPA),pentaerythritol triacrylate(PETA).
用异佛尔酮二异氰酸酯(IPDI)、丙三醇、聚四氢呋喃醚二醇(PTMG)、甲基丙烯酸羟乙酯(DMPA)、季戊四醇三丙烯酸酯(PETA)等原料合成了具有高交联度的多官能度紫外光固化聚氨酯丙烯酸酯(PUA)水乳液。
补充资料:季戊四醇四丙烯酸酯
分子式:(CH2=CHCOOCH2)4C
CAS号:
性质:又称季戊四醇四丙烯酸酯。=1.4870。密度1.190g/ml(20℃)。闪点>110℃。由季戊四醇与丙烯酸在对甲苯磺酸催化下,共沸脱水直接酯化而得。主要用作交联剂,产品广泛用于涂料、黏合剂、印刷线路板、油墨等。
CAS号:
性质:又称季戊四醇四丙烯酸酯。=1.4870。密度1.190g/ml(20℃)。闪点>110℃。由季戊四醇与丙烯酸在对甲苯磺酸催化下,共沸脱水直接酯化而得。主要用作交联剂,产品广泛用于涂料、黏合剂、印刷线路板、油墨等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条