1) hydroxyl acid polyester
羟基酸聚酯
2) Polyhydroxyheptanoate
聚羟基庚酸酸酯
3) poly(β-hydroxybutyrate)
聚β-羟基丁酸酯
1.
In vitro Charaterization of Insulin-Loaded Poly(β-hydroxybutyrate)Microspheres;
胰岛素聚β-羟基丁酸酯微球体外性质的研究
2.
Study on Preparation Technology of Insulin-Poly(β-hydroxybutyrate)Microspheres;
胰岛素聚β-羟基丁酸酯微球制备工艺的研究
3.
The cold crystallization,miscibility and crystallinity of poly(β-hydroxybutyrate)(PHB)/poly(L-lactide) blends with different mass ration,and poly(ethylene oxide)(PEO)/PHB/PLLA blends were investigated.
利用DSC研究了聚β-羟基丁酸酯(PHB)与聚乳酸(PLLA)共混物的冷结晶性、相容性和结晶度以及聚氧乙烯(PEO)对PHB/PLLA(质量比为1∶1)共混物冷结晶性、熔融温度和结晶度的影响。
4) polyhydroxyalkanoates
聚羟基烷酸酯
1.
Process regulation for monomer composition of polyhydroxyalkanoates produced by activated sludge;
活性污泥合成聚羟基烷酸酯中单体组分的调控
2.
Structure Characterization of Polyhydroxyalkanoates Produced from Activated Sludge in Waste Water Treatment Process;
用活性污泥生物合成聚羟基烷酸酯的结构表征
3.
Metabolic mechanisms of polyhydroxyalkanoates synthesis in activated sludge bacteria;
活性污泥合成聚羟基烷酸酯代谢机制研究进展
5) polyhydroxybutyrate
聚羟基丁酸酯
1.
Advances on modification of biodegradable plastics polyhydroxybutyrate;
生物塑料聚羟基丁酸酯的改性进展
2.
Topography of Polyhydroxybutyrate Banded Spherulites;
聚羟基丁酸酯环带球晶的形貌研究
3.
Experimental studies on the complex of cytocompatibility of polyhydroxybutyrate(PHB) and bone marrow stromal cells (BMSCs) in repairing rabbits mandibular defects;
聚羟基丁酸酯复合骨髓基质细胞构建组织工程骨修复兔下颌骨缺损
6) poly(β-hydroxybutyrate)
聚羟基丁酸酯
1.
The blends of poly(β-hydroxybutyrate) (PHB) modified by polyethylene glycol, obtained by solution blend with chloroform as solvent, have been investigated using differential scanning calorimetry, wide angle X-ray diffusion and tensile experiments.
研究了聚乙二醇(PEG)溶液共混改性聚羟基丁酸酯(PHB)。
2.
Poly(L-lactide) and poly(β-hydroxybutyrate) possess excellent properties, such as good biocompatibility, biodegradability and mechanical strength, which suggest strong application potentials in tissue engineering.
以聚乳酸为代表的聚酯类生物降解材料是目前组织工程研究中最常用的支架材料之一,聚乳酸(PLLA)、聚羟基丁酸酯(PHB)良好的物理机械性能、生物可降解性、生物相容性使其在组织工程领域有着广阔的发展前景。
3.
The blends of poly(β-hydroxybutyrate)(PHB) modified by polyethylene oride(PEO), obtained by solution blend with chloroform as solvent, have been investigated using differential scanning calorimetry, tensile test and degradation experiments.
用聚氧化乙烯(PEO)共混改性聚羟基丁酸酯(PHB),DSC、力学性能及降解实验表明,PHB/PEO共混物为相容体系,PEO的加入可使共混物熔点降低,从而可以降低加工温度;同时PEO的加入,还能提高PHB的韧性及调节降解速率。
补充资料：羟基酸聚酯
分子式：
CAS号：
性质：由羟基羧酸缩聚生成的线性聚酯(O—R—CO)n。R为脂肪烃基或芳香烃基。前者以聚羟基乙酸酯、聚乳酸酯、聚β-羟基丁酸酯、羟基乙酸和乳酸共聚酯为代表，主要作为医用高分子材料用作药物控制释放载体、可吸收骨钉及其他骨骼固定材料、外科缝合线等。后者以聚对羟基苯甲酸酯为代表，系耐高温工程塑料。使用温度可达300℃。并具有耐磨、自润滑、耐辐射、耐有机溶剂和电性能优良的特点。可在机械工业中用作耐磨自润滑材料。
CAS号：
性质：由羟基羧酸缩聚生成的线性聚酯(O—R—CO)n。R为脂肪烃基或芳香烃基。前者以聚羟基乙酸酯、聚乳酸酯、聚β-羟基丁酸酯、羟基乙酸和乳酸共聚酯为代表，主要作为医用高分子材料用作药物控制释放载体、可吸收骨钉及其他骨骼固定材料、外科缝合线等。后者以聚对羟基苯甲酸酯为代表，系耐高温工程塑料。使用温度可达300℃。并具有耐磨、自润滑、耐辐射、耐有机溶剂和电性能优良的特点。可在机械工业中用作耐磨自润滑材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条