1) offset yield stress
偏置屈服应力
2) maximum deviatoric stress yield rule
最大偏应力屈服准则
1.
Study on the relationship between maximum deviatoric stress yield rule and Mises and Tresca yield conditions;
试论最大偏应力屈服准则与Mises、Tresca屈服条件的关系
3) yield stress
屈服应力
1.
Investigation on start-up yield stress of Daqing gelled crude oil;
大庆胶凝原油启动屈服应力研究
2.
Study on Yield Stress of LC_4 Alloy in the Semi-solid State;
LC_4合金的显微组织与屈服应力
3.
Analysis of yield stress states of fcc metals under plane deformation;
面心立方金属平面变形的屈服应力状态分析
4) yielding stress
屈服应力
1.
Theoretical analysis shows that the dynamic yielding stress, apparent viscosity, and average normal stress of electrorheological suspensions are greatly strengthened with the variation of rheological gap and changes in the electric field strength during the squeezing process under a constant voltage.
从理论上分析了挤压流动形式 ,得出在电压一定的条件下 ,随着挤压过程的进行 ,流动区域间隙的改变 ,使得电场强度产生变化 ,从而使电流变液体的动态屈服应力、表观粘度和平均法向应力得到大大增强 。
2.
In the test,the relation of the yielding stress to R is derived,according to two kinds of stress states.
根据两种不同的应力状态,推导了屈服应力与R值的关系,加深了对各向异性屈服准则的认识。
3.
With the increase of the intensity of applied electric field, the yielding stress of ER fluid will be increased and the conversion from liquid to solid can be achieved.
电流变体在电场的作用下液体粘度增加,可由液体变为类似的固体,它的屈服应力τ_y随着电场强度的增加而增加,利用这一性质,可以制成智能型阻尼器,用于结构地震反应控制。
5) stress yielding
应力屈服
1.
Effects of physical aging on the tensile properties,stress yielding mechanism and submicroscopic structure of amorphous PES copolymer film were studied by DSC,stress-strain curve and fluorescence spectrum measurements.
物理老化后的聚醚砜共聚物在拉伸过程中出现应力屈服峰,实质上是逐步打开凝聚缠结的过程。
6) yield stress
屈服应力,屈服点
补充资料：偏置屈服应力
分子式：
CAS号：
性质：应力-应变曲线偏离线性达到规定应变百分数的应力。也有称作残余变形屈服应力。该规定的变形量是人们事先商定的（偏置）。这种场合往往是由于该材料的应力、应变曲线不出现明显的屈服点，故作此规定。以统一衡量材料的力学性能，便于互相比较。当然，规定的该值不应超过该材料的拉伸强度值。
CAS号：
性质：应力-应变曲线偏离线性达到规定应变百分数的应力。也有称作残余变形屈服应力。该规定的变形量是人们事先商定的（偏置）。这种场合往往是由于该材料的应力、应变曲线不出现明显的屈服点，故作此规定。以统一衡量材料的力学性能，便于互相比较。当然，规定的该值不应超过该材料的拉伸强度值。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条