1) heat resistant polysulfone
耐热聚砜
2) heat resistant polysulfone
耐高温聚砜
3) polysulfone
聚砜
1.
A study on the deep treatment of reclaimed water with the composite nanofiltration membrane of carboxymethyl chitin and polysulfone;
羧甲基甲壳素/聚砜复合纳滤膜对中水的深度处理研究
2.
Formation and characterization of glutaraldehyde-sulfuric acid mixed crosslinked chitosan/polysulfone composite nanofiltration membrane;
戊二醛-硫酸混合交联壳聚糖/聚砜复合纳滤膜的结构与性能
3.
Aromatic polyamide (or polyester)-containing microcomposites by in-situ polycondensation Part Ⅳ. Synthesis of poly(p-phenylene terephthalamide)/polysulfone microcomposites;
原位缩聚合成含聚芳酰胺/酯的微相复合材料 Ⅳ.全芳香聚酰胺与聚砜的微相复合材料制备
4) PSF
聚砜
1.
Study and Preparation of a Hollow Fiber Ultrafiltration Membrane of the Blends of PVC/PSF;
聚氯乙烯/聚砜共混中空纤维超滤膜的研制
2.
Preparation and Characterization of the PSF hollow fiber ultrafiltration support membrane
聚砜中空纤维超滤基膜的制备
3.
The chelate resin D418/PSF heterogeneous chelate membranes with high chelate capcity for Cu 2+ have been prepared.
通过探讨共混比例、螯合树脂粒径、PSF(聚砜 )浓度及制膜液温度对膜性能的影响 ,用相转换法制备出对Cu2 +具有大螯合容量的D4 18树脂 /聚砜异相共混螯合滤膜 。
5) polysulfone(PSf)
聚砜
1.
The behaviors of polysulfone(PSf)/dimethylacetamide(DMAc)fluids with LiCl, alcohols, acetone as pore-forming additives were studied.
以LiC1饱和水溶液、醇类(甲醇和乙醇)、丙酮等小分子为添加剂,配制聚砜(PSf)/二甲基乙酰胺(DMAc)铸膜液,研究该铸膜液的粘度随添加剂的类型和含量的变化情况,重点探讨了PSf/DMAc/LiCl饱和水溶液体系的流变性能。
2.
Polyethersulfone(PES), polysulfone(PSF) and sulfonated polysulfone(SPSF) binary and ternary alloy ultrafiltration membranes were prepared and studied in this paper.
主要研究了聚醚砜 (PES)、聚砜 (PSF)和磺化聚砜 (SPSF)共混所形成的多元合金超滤膜的性能和膜的孔径分布特性 ,初步探讨了多元合金超滤膜的成孔机理 ,并对共混体系的组成及相容性与合金超滤膜性能间的关系作了详细讨论 。
3.
In this paper, A positively charged compositer nanofiltration(NF) membrane was developed by interfacial polymerization(quaternization) using polysulfone(PSF) ultrafiltration membrane as support membrane, poly[2-(N,N-dimethyl amino)ethyl methacrylate] (PDMAEMA) as coating material, and p-xylylene dichloride as crosslinking agent.
本文以聚甲基丙烯酸-N,N-二甲氨基乙酯(PDMAEMA)为表层材料,以对二氯苄为交联剂,以聚砜(PSF)超滤膜为基膜,通过界面聚合反应(季铵化反应)制备了荷正电复合纳滤膜。
6) PSU
聚砜
1.
ANALYSIS OF THE REASONS INFLUENCING PSU PRODUCT SURFACE QUALITY AND THEIR PRECAUTIONARY MEASURES;
影响聚砜制品表面质量的原因分析和预防措施
2.
The article indicated that the PSU was a suitable material for case of high power AgO-Zn secondary battery.
介绍了目前锌银二次电池壳体材料的现状和存在的问题,以及塑料材料壳体对电池的不良影响;认为聚砜(PSU)适合用作大功率锌银二次电池壳体材料;指出壳体材料和工艺的改进将显著提高锌银二次电池的性能水平。
补充资料：耐热聚砜
分子式：
CAS号：
性质：又称耐高温聚砜。其分子主链除—SO2—外为全芳族结构单元，包括聚芳砜和聚苯砜。可在260℃以上长期使用。
CAS号：
性质：又称耐高温聚砜。其分子主链除—SO2—外为全芳族结构单元，包括聚芳砜和聚苯砜。可在260℃以上长期使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条