1) heat-resisting forging aluminium alloy
耐热锻铝合金
2) heat resistant aluminum alloy
耐热铝合金
1.
In this paper, the development of rapid-solidified heat resistant aluminum alloys are reviewed, and the principle of compositional selecting, preparation methods and reinforcement mechanism are analyzed emphatically.
耐热铝合金由于具有低密度、低价格、良好的耐热和耐腐蚀性能,在航空、航天等工业领域得到了广泛应用。
3) heat-resistant aluminum alloy
耐热铝合金
1.
Lubrication action of pure aluminum during high temperature deformation of heat-resistant aluminum alloy;
纯铝在耐热铝合金高温变形过程中的润滑作用
2.
Experimental investigation on forge forming process of spray deposited blanks of rapidly solidified AlFeX heat-resistant aluminum alloy;
快速凝固AlFeX耐热铝合金喷射沉积坯锻造成型工艺试验研究
3.
Densification and mechanical properties of spray deposited large scale heat-resistant aluminum alloy tubular preforms during wedge pressing;
大尺寸喷射沉积耐热铝合金管坯楔压致密化与力学性能
4) heat-resistant Al alloy
耐热铝合金
1.
The heat flow of the depositing process in the course of the preparation of multi-layer spray deposited (MLSD) pipe blank of heat-resistant Al alloy was modeled.
通过建立沉积阶段热流分析模型,对多层喷射沉积制备耐热铝合金管坯过程中喷射流沉积后的凝固和冷却进行了分析。
2.
This paper established a model for the heat flow of the atomization process in preparing the multi-layer spray deposited (MLSD) heat-resistant Al alloy pipe blank, and calculated the kinetic energy and heat transformation between the molten droplets and the atomization gas.
建立了多层喷射沉积制备管坯的雾化过程热流模型,并对耐热铝合金熔滴在雾化飞行过程中与雾化气流的动能和热能交换进行了计算和分析。
5) heat-resistance aluminum
耐热铝合金
1.
Tensile deformation behavior of heat-resistance aluminum (FVS0812) sheet at elevated temperature;
耐热铝合金(FVS0812)板材温拉伸本构方程
2.
Drawing technology of heat-resistance aluminum hemisphere-shaped part;
球面形耐热铝合金零件拉深成形工艺研究
3.
Research on property of heat-resistance Aluminum(FVS0812) sheet drawing;
耐热铝合金FVS0812板材冲压成形性能研究
6) high temperature aluminum alloy
耐热铝合金
1.
This paper reviews the advantages and disadvantages of RS/PM and spray forming producing high temperature aluminum alloy.
分析了快速凝固 /粉末冶金方法和喷射沉积方法两种工艺制备耐热铝合金的优缺点。
2.
The flat plates of high temperature aluminum alloy FVS0812 with the dimensions of 500 mm×300 mm×20 mm are prepare.
在综合考虑工艺参数、热应力和板材成形三者关系的基础上，优化工艺参数，制备出５００ｍｍ３００ｍｍ２０ｍｍ的耐热铝合金ＦＶＳ０８１２板
3.
ome questions in the development of rapidly solidified high temperature aluminum alloy is discussedin this report.
研究了ＲＳ／ＰＭＡｌ－Ｆｅ－ＭＲＥ耐热铝合金的粉末成形工艺、组织与性能的关系。
补充资料：耐热锻铝合金
分子式：
CAS号：
性质：一种耐热变形铝合金。通常采用铝铁镁铁镍合金。组织中主要的强化相是Al2CuMg和FeNiAl6。常用牌号有LD7，LD8和LD9。具有较好的耐热性，较小的热膨胀系数、良好的导热性和加工性能，可加工成各种铝材和锻件，用作在150～250℃工作的各种结构零件。
CAS号：
性质：一种耐热变形铝合金。通常采用铝铁镁铁镍合金。组织中主要的强化相是Al2CuMg和FeNiAl6。常用牌号有LD7，LD8和LD9。具有较好的耐热性，较小的热膨胀系数、良好的导热性和加工性能，可加工成各种铝材和锻件，用作在150～250℃工作的各种结构零件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条