1) anti-static acrylic plastics
![点击朗读](/dictall/images/read.gif)
防静电有机玻璃
2) Polymethyl methacrylate
![点击朗读](/dictall/images/read.gif)
有机玻璃
1.
Tension and bending fatigue tests were carried out to investigate the fatigue behavior of polymethyl methacrylate for edge attachment element at different temperatures.
研究了有机玻璃边缘连接元件在不同温度下的拉伸和弯曲疲劳特性。
2.
For polymethyl methacrylate(PMMA),pure mode I fracture tests were performed under quasi-static loading by using central notched circular disk specimen.
采用直槽式和尖槽式中心切口圆盘试件,对有机玻璃在纯Ⅰ型准静态加载条件下的断裂行为进行了实验研究。
3.
Mechanical and optical functions of polymethyl methacrylate were analyzed in this paper.
![点击朗读](/dictall/images/read.gif)
首次对国产有机玻璃的力学性能、光学性能等性质进行了全面研究 ,通过试验得到了常温和冻结温度的有机玻璃的性能数据 ,提出了常温时光塑性条纹是应变条纹 ,冻结温度下光塑性条纹是应力条纹的新观点。
3) Organic Glass
![点击朗读](/dictall/images/read.gif)
有机玻璃
1.
Study on Preparation and Performance of Organic Glass Containing Pb by Microemulsion Polymerization;
利用微乳液制备含铅有机玻璃及其性能研究
2.
Effect of Molecular Structure of Organic Glass on Property;
![点击朗读](/dictall/images/read.gif)
有机玻璃的分子结构对其性能的影响
3.
Investigation on Production of Organic Glass Craftworks by Casting Bulk Polymerization;
![点击朗读](/dictall/images/read.gif)
铸塑本体聚合法生产有机玻璃工艺制品研究
4) plexiglass
[英]['pleksiglɑ:s] [美]['plɛksɪ,glæs]
![点击朗读](/dictall/images/read.gif)
有机玻璃
1.
Development of the aviation plexiglass drawing force digital PID control system;
![点击朗读](/dictall/images/read.gif)
航空有机玻璃拉伸机拉伸力数字PID控制系统开发
2.
Results indicate that plexiglass protective layers have better adhesion than silicate protective layers;with the increasing of temperature and holding time,adhesion of silicate protective layers is going up at first and then down,while that of plexiglass rises at first and then don't change;cooling mode has great influence on adhesion of silicate protective layers,while it has no impact on.
结果表明:有机玻璃防护层的结合强度较硅酸盐玻璃的高;随着制备温度和保温时间的增加,硅酸盐玻璃防护层的结合强度先上升后下降,而有机玻璃防护层的结合强度上升后不再变化。
3.
The result of the experiment shows that if add crosslinking TAIC and plasticizer phthalate to the ploymer,heat resistance and brittleness of plexiglass could be modified.
2%)和增塑剂邻苯二甲酸二丁酯(用量为单体用量的8%~12%),可改进有机玻璃的耐热性和脆性。
5) PMMA
![点击朗读](/dictall/images/read.gif)
有机玻璃
1.
Study on Novel Technique for Preparation of PMMA;
![点击朗读](/dictall/images/read.gif)
一种制备纯有机玻璃的新工艺研究
2.
Experimental Research on The Constitutive Relationship of PMMA;
![点击朗读](/dictall/images/read.gif)
有机玻璃本构关系的试验研究
3.
Study of Improvement of Antistatic Property of PMMA by Plasma Surface treatment;
![点击朗读](/dictall/images/read.gif)
等离子体表面改性法改善有机玻璃抗静电性能的研究
6) polymethylmethacrylate
[,pɔlimeθilme'θækrəleit]
![点击朗读](/dictall/images/read.gif)
有机玻璃
1.
Feasibility study of the QS-7 primer by way of polymethylmethacrylate cement coupling agent;
“QS—7粘接底涂”作为有机玻璃粘接偶联剂的可行性研究
2.
A study on the Determination of the Monomer of the Polymethylmethacrylate by Reverse Phase High Performance Liquid Chromatography;
反相高效液相色谱法测定有机玻璃中的单体的方法研究
3.
This paper contains two main contents: (1) the charring problem in the boring process of polymethylmethacrylate is solved and a new techmological method of rectangular wave feed is put formard; (2) the theoretical formula of surface roughness of boring process is deduced by using Reynolds eguation.
本文主要介绍钻削加工有机玻璃,避免出现“烧焦”现象,采用矩形波占孔进刀的工艺方法;并根据流体力学的雷诺力程。
补充资料:防静电有机玻璃
分子式:
CAS号:
性质:具有轻度导电性从而防止表面静电荷积聚的有机玻璃。属半永久性防静电材料。有较好的防静电性,表面电阻率1011~1012Ω(普通有机玻璃>1015Ω)。透光率90%左右。机械强度和耐热性有所下降。有防静电浇铸板和防静电模塑料两类。板材用表面涂层法或掺混聚合法制造。表面涂层法用的抗静电剂有脂肪酸盐和多元醇的酯化物、硬脂酸和乙二胺的缩合物、聚乙烯亚胺与多官能硅化物。掺混聚合法是在单体中溶解抗静电剂(高级脂肪酸单甘油酯、聚亚烷基二醇和磷酸三酯等)再行聚合的方法。有机玻璃模塑料中均匀掺混抗静电剂后再造粒可制得抗静电粒料。主要用于电子仪器、仪表及计算机等部件的外壳、指针表玻璃及工业上需要防静电设备的窗罩等。
CAS号:
性质:具有轻度导电性从而防止表面静电荷积聚的有机玻璃。属半永久性防静电材料。有较好的防静电性,表面电阻率1011~1012Ω(普通有机玻璃>1015Ω)。透光率90%左右。机械强度和耐热性有所下降。有防静电浇铸板和防静电模塑料两类。板材用表面涂层法或掺混聚合法制造。表面涂层法用的抗静电剂有脂肪酸盐和多元醇的酯化物、硬脂酸和乙二胺的缩合物、聚乙烯亚胺与多官能硅化物。掺混聚合法是在单体中溶解抗静电剂(高级脂肪酸单甘油酯、聚亚烷基二醇和磷酸三酯等)再行聚合的方法。有机玻璃模塑料中均匀掺混抗静电剂后再造粒可制得抗静电粒料。主要用于电子仪器、仪表及计算机等部件的外壳、指针表玻璃及工业上需要防静电设备的窗罩等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条