1) polyether-polyurethane enamel
聚醚聚氨酯漆
2) Polyurethane paint
聚氨酯漆
1.
This article is focused on the synthesis and property of a resin for polyurethane paint from cashew nut shell liquid,caster-oil and amine.
通过共缩聚的方法 ,由天然产物腰果壳液、蓖麻油和胺类化合物等制成聚氨酯漆用树脂 ,并研究该树脂与聚氨酯预聚体的反应性 ,以及所形成漆膜的理化性能。
2.
In the production of polyurethane paint,pentaerythritol is em ployed in the place of alkyd resin .
介绍以季戊四醇代甘油制聚氨酯漆醇酸组份的配方、工艺及树脂性能。
3.
High solid polyester polyurethane paint composed of high solid polyester polyol resin and polyurethane resin had been prepared.
以废聚酯材料、季戊四醇、豆油酸、苯酐等为主要原料制备了高固体分聚酯多元醇树脂,再与高固体分聚氨酯树脂配制而成高固体聚酯型聚氨酯漆。
3) polyether-urethane
聚醚氨酯
1.
Evaluation of small-angle X-ray scattering of polyether-urethane;
聚醚氨酯的SAXS研究
2.
A set of polyether-urethane block copolymers were prepared that poly(tetramethylene oxide)PTMEG was regarded as soft segment and 4,4'-methylenebis(phenyl isocyanate)(MDI) was regarded as hard segment in this article.
以聚四氢呋喃二醇 (PTMEG)为软段 ,以 4 ,4’ 二苯基甲烷二异氰酸酯 (MDI)和间苯二胺为硬段 ,合成了一系列聚醚氨酯嵌段共聚物。
3.
Silicon-containing foamed polyether-urethane was prepared by toluenediisocyanate, polyols, foamer dichloromethane and chain extender dihydroxyl tetracoordinate silicon.
以SiO2 为原料 ,通过非碳热法合成出双羟基四配位硅化合物 ;然后以此为扩链剂 ,以二氯甲烷为发泡剂 ,与甲苯二异氰酸酯、聚醚多元醇反应制成含硅发泡聚醚氨酯。
4) polyether urethane
聚醚氨酯
1.
The investigation on polyether urethane and epoxydiacrylates resins simultaneous interpenetrating polymer networks (Ⅰ);
聚醚氨酯环氧树脂同时互穿网络的研究(Ⅰ)
2.
The investigation on polyether urethane and epoxydiacrylates resins simultaneous interpenetrating networks(Ⅱ);
聚醚氨酯环氧树脂同时互穿网络的研究 (Ⅱ )
3.
The preparations of interpenetrating polymer networks (IPNs) based on polyether urethane and epoxydiacrylates resin by simultaneous polymerization technique was investigated.
通过改变聚醚氨酯和环氧丙烯酸酯树脂组分比 ,合成了不同组成的同时互穿网络聚合物 (SINs) ,采用红外光谱 ,扫描电镜和动态热力学分析等测试方法 ,研究了 SINs材料的组分间分子混合和形态结构 ,探讨了材料的组分与力学及热学性能的关系。
5) polyurethane
[英][,pɔli'jʊərəθeɪn] [美]['pɑlɪ'jurə'θen]
聚醚氨酯
1.
In this paper, the interpenetrating polymer network (IPN) based on UV\|curing polyurethane (PU) and epoxy (EP) was studied.
本文以光固化型的聚醚氨酯 (PU)与环氧树脂 (EP)为体系 ,由不同的组成比制备了一系列 PU/EP的 IPN材料 ,经力学性能测试 ,均显正协同效应 ,且协同效应的大小与聚合物网络的互穿程度有关 。
2.
This paper studied the interpenetrating polymer networks based on UV curing polyurethane(PU) and epoxy(EP) with different preparating methods——simultaneous and sequential.
分别采用同步互穿和顺序互穿的方法制备了光固化型的聚醚氨酯（ＰＵ）与环氧树脂（ＥＰ）的互穿网络聚合物（ＩＰＮ）。
6) poly(Ether Urethane)
聚醚氨酯
1.
Synthesis and its damping behavior studies of poly(Ether Urethane) /poly(Methyl Methacrylate) IPNs;
聚醚氨酯/聚甲基丙烯酸甲酯IPN阻尼性能研究
2.
Surface Modification of Poly(ether urethane) Membrane with RGD and Its Cytocompatibility of Human Endothelial Cell;
RGD改性聚醚氨酯及其内皮细胞相容性的研究
补充资料：聚醚聚氨酯漆
分子式：
CAS号：
性质： 由聚醚和多异氰酸酯按比例配制而成的一种双组分涂料。漆膜具有优良的耐碱性、耐寒性和柔韧性，但耐候性较差。主要用作室内的抗化学腐蚀漆、地板漆等。
CAS号：
性质： 由聚醚和多异氰酸酯按比例配制而成的一种双组分涂料。漆膜具有优良的耐碱性、耐寒性和柔韧性，但耐候性较差。主要用作室内的抗化学腐蚀漆、地板漆等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条