1) POP
聚烯烃塑性体
2) polyolefin elastomer
聚烯烃热塑性弹性体
1.
The functionalization of polyolefin elastomer (POE) is more and more attractive due to enhanced compatibility with other polarized polymers.
介绍了聚烯烃热塑性弹性体(POE)官能化-熔融接枝的几种方法:在有机过氧化物引发剂存在下的熔融接枝法,裂解引发接枝,机械力引发接枝,复合引发接枝等,POE官能化接枝能改善其与极性的聚物间的界面亲和性,提高共混物的相容性、冲击强度和韧性等,从而拓宽POE的应用领域。
3) POE
['pəui]
聚烯烃热塑性弹性体
1.
PP/POE blends were prepared by means of melt blending.
采用熔融共混工艺制备了聚丙烯(PP)/聚烯烃热塑性弹性体(POE)共混物,用动态力学试验方法研究了PP/POE材料的动态力学特征。
2.
PP/POE/Nano-meter CaCO 3 composites were prepared by melt-blending.
采用熔融共混工艺制备了聚丙烯 (PP) /聚烯烃热塑性弹性体 (POE) /纳米CaCO3 复合材料。
3.
POE was employed for toughening PP and inorganic fillers were added simultaneously,some organic and inorganic light ,heat stabilizers were also employed for improving the weatherproof property of PP.
采用聚烯烃热塑性弹性体 (POE)增韧聚丙烯 (PP) ,同时加入无机填料进行填充 ;并加入有机和无机光、热稳定剂增加PP的耐候性。
4) POE
['pəui]
热塑性聚烯烃弹性体
1.
The property of PP/carbon black conductive composite and the effect of toughener POE on the property of the composite were studied.
热塑性聚烯烃弹性体(POE)的加入,对复合材料的导电性能影响不大,其用量控制在一定范围内,可使PP导电复合材料综合性能得到较好的改善。
2.
The melt gragting of maleic anhydride (MAH) onto polyolefin elastomer (POE) was carried out via reactive extrusion by twin-screw extruder.
用同向双螺杆挤出机进行热塑性聚烯烃弹性体(POE)熔融接枝马来酸酐(MAH)的反应,考察了MAH单体、引发剂用量和加工条件对接枝率的影响。
5) thermoplastic polyolefin
热塑性聚烯烃
1.
Development of asphalt modified thermoplastic polyolefin waterproofing sheet;
沥青改性热塑性聚烯烃防水片材的制备及性能研究
2.
Study on thermoplastic polyolefin modified asphalt waterproofing membrane;
热塑性聚烯烃改性沥青防水卷材试验研究
3.
Study on dynamic vulcanization of thermoplastic polyolefin (TPV)waterproofing sheet
动态硫化热塑性聚烯烃(TPV)防水片材的研究
6) polyolefin-TPR/ACR copolymer
聚烯烃热塑性弹性体/丙烯酸酯类共聚物
1.
The results showed that polyolefin-TPR/ACR copolymer was the best toughness and viscosity modifier.
结果表明,以聚烯烃热塑性弹性体/丙烯酸酯类共聚物为增韧增粘剂且含量约为10%时,可以得到综合能优于PA6的高阻隔性容器吹塑专用料,该材料可用作汽油、农药等的包装储罐,具有广阔的应用前景。
补充资料：聚烯烃塑性体
分子式：
CAS号：
性质：指呈现塑料特征之烯烃共聚物。是相对于聚烯烃弹性体而言。包括大部分市售乙烯与少量α-烯烃共聚物，丙烯和少量乙烯或其他α-烯烃共聚物等。
CAS号：
性质：指呈现塑料特征之烯烃共聚物。是相对于聚烯烃弹性体而言。包括大部分市售乙烯与少量α-烯烃共聚物，丙烯和少量乙烯或其他α-烯烃共聚物等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条