说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 抗冲有机玻璃
1)  impact resistant acrylic plastics
抗冲有机玻璃
2)  Polymethyl methacrylate
有机玻璃
1.
Tension and bending fatigue tests were carried out to investigate the fatigue behavior of polymethyl methacrylate for edge attachment element at different temperatures.
研究了有机玻璃边缘连接元件在不同温度下的拉伸和弯曲疲劳特性。
2.
For polymethyl methacrylate(PMMA),pure mode I fracture tests were performed under quasi-static loading by using central notched circular disk specimen.
采用直槽式和尖槽式中心切口圆盘试件,对有机玻璃在纯Ⅰ型准静态加载条件下的断裂行为进行了实验研究。
3.
Mechanical and optical functions of polymethyl methacrylate were analyzed in this paper.
首次对国产有机玻璃的力学性能、光学性能等性质进行了全面研究 ,通过试验得到了常温和冻结温度的有机玻璃的性能数据 ,提出了常温时光塑性条纹是应变条纹 ,冻结温度下光塑性条纹是应力条纹的新观点。
3)  Organic Glass
有机玻璃
1.
Study on Preparation and Performance of Organic Glass Containing Pb by Microemulsion Polymerization;
利用微乳液制备含铅有机玻璃及其性能研究
2.
Effect of Molecular Structure of Organic Glass on Property;
有机玻璃的分子结构对其性能的影响
3.
Investigation on Production of Organic Glass Craftworks by Casting Bulk Polymerization;
铸塑本体聚合法生产有机玻璃工艺制品研究
4)  plexiglass [英]['pleksiglɑ:s]  [美]['plɛksɪ,glæs]
有机玻璃
1.
Development of the aviation plexiglass drawing force digital PID control system;
航空有机玻璃拉伸机拉伸力数字PID控制系统开发
2.
Results indicate that plexiglass protective layers have better adhesion than silicate protective layers;with the increasing of temperature and holding time,adhesion of silicate protective layers is going up at first and then down,while that of plexiglass rises at first and then don't change;cooling mode has great influence on adhesion of silicate protective layers,while it has no impact on.
结果表明:有机玻璃防护层的结合强度较硅酸盐玻璃的高;随着制备温度和保温时间的增加,硅酸盐玻璃防护层的结合强度先上升后下降,而有机玻璃防护层的结合强度上升后不再变化。
3.
The result of the experiment shows that if add crosslinking TAIC and plasticizer phthalate to the ploymer,heat resistance and brittleness of plexiglass could be modified.
2%)和增塑剂邻苯二甲酸二丁酯(用量为单体用量的8%~12%),可改进有机玻璃的耐热性和脆性。
5)  PMMA
有机玻璃
1.
Study on Novel Technique for Preparation of PMMA;
一种制备纯有机玻璃的新工艺研究
2.
Experimental Research on The Constitutive Relationship of PMMA;
有机玻璃本构关系的试验研究
3.
Study of Improvement of Antistatic Property of PMMA by Plasma Surface treatment;
等离子体表面改性法改善有机玻璃抗静电性能的研究
6)  polymethylmethacrylate [,pɔlimeθilme'θækrəleit]
有机玻璃
1.
Feasibility study of the QS-7 primer by way of polymethylmethacrylate cement coupling agent;
“QS—7粘接底涂”作为有机玻璃粘接偶联剂的可行性研究
2.
A study on the Determination of the Monomer of the Polymethylmethacrylate by Reverse Phase High Performance Liquid Chromatography;
反相高效液相色谱法测定有机玻璃中的单体的方法研究
3.
This paper contains two main contents: (1) the charring problem in the boring process of polymethylmethacrylate is solved and a new techmological method of rectangular wave feed is put formard; (2) the theoretical formula of surface roughness of boring process is deduced by using Reynolds eguation.
本文主要介绍钻削加工有机玻璃,避免出现“烧焦”现象,采用矩形波占孔进刀的工艺方法;并根据流体力学的雷诺力程。
补充资料:抗冲有机玻璃
分子式:
CAS号:

性质:有良好冲击强度的有机玻璃。有板材和模塑料两种类型。和普通有机玻璃相比,韧性好、耐冲击,耐热性、拉伸强度和表面硬度稍低,其余性能相仿。可用本体浇铸聚合、乳化接枝聚合或本体-悬浮聚合,在甲基丙烯酸甲酯中引入橡胶组分制得,橡胶组分通常是聚丙烯酸丁酯或聚丁二烯。适用于作广告牌、照明灯具、建筑和交通车辆的窗玻璃、汽车外装零件、弱电流零件和家用器具等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条