说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> a-甲基丙烯酸
1)  2-Methylpropencic acid
a-甲基丙烯酸
2)  methyl acrylic acid
甲基丙烯酸
1.
Study on the Catalyst Used in Direct Oxidation of Isobutane to Methyl Acrylic Acid;
异丁烷直接氧化制甲基丙烯酸催化剂的研究
2.
A new polymeric surfactant using for acrylic acid waterborne coatings was prepared from the methyl acrylic acid,styrene,hydroxyethyl acrylate and 2-ethylhexyl acrylate.
以甲基丙烯酸、苯乙烯、丙烯酸羟乙酯和丙烯酸-2-乙基己酯为主要原料,通过溶液共聚法合成了用于丙烯酸酯水性涂料的高分子表面活性剂。
3.
Polypropylene (PP) was swelled with a solution of methyl acrylic acid (MAA) in supercritical CO2 and was grafted with MAA via free radical polymerization leading to PP-g-MAA, with a maximum grafting degree of 14.
利用超临界CO2作为甲基丙烯酸(MAA)的溶剂和聚丙烯(PP)的溶胀剂,合成了MAA与PP的接枝聚合物 (PP-g-MAA)。
3)  methacrylic acid
甲基丙烯酸
1.
Surface Organic Modification of Hydroxypatite Particles through UV Irradiation Polymerization of Methacrylic Acid;
羟基磷灰石表面光引发甲基丙烯酸聚合有机化改性的研究
2.
Ethylene-propylene-diene rubber filled with nano-calcium carbonate in-situ modified by methacrylic acid Ⅰ.Effect of curing agent and methacrylic acid amount;
用甲基丙烯酸原位改性纳米碳酸钙填充三元乙丙橡胶 Ⅰ.交联剂和甲基丙烯酸用量的影响
3.
Ethylene-propylene-diene rubber filled with nano-CaCO_3 in-situ modified by methacrylic acid Ⅱ. Effect of nano-CaCO_3 amount;
用甲基丙烯酸原位改性纳米CaCO_3填充三元乙丙橡胶 Ⅱ.纳米CaCO_3用量的影响
4)  methacylic acid
甲基丙烯酸
1.
Acrylonitrile(AN)/ methacylic acid(MAA) copolymer foam plastic was prepared by free foaming.
通过烘箱自由发泡制备丙烯腈(AN)/甲基丙烯酸(MAA)共聚物泡沫塑料,讨论了该泡沫塑料泡孔平均孔径随泡沫塑料密度变化的规律,研究了成核剂和应力对泡沫塑料泡孔尺寸的影响,通过光学显微和电子扫描显微观察了该泡沫塑料的整体结构和微观结构。
2.
Copolymer foam of acrylonitrile (AN)/methacylic acid (MAA) was prepared and characterized using optical microscope, inf rared adsorption spectrum and differential thermal analysis (DSC).
研究了丙烯腈(AN)/甲基丙烯酸(MAA)共聚物泡沫塑料的合成配方和制备该泡沫塑料的方法,对该泡沫塑料进行了光学显微镜、红外光谱和差示扫描量热法分析。
3.
Acrylonitrile (AN)/ methacylic acid (MAA) copolymer foam plastic was prepared by two-step production.
本论文以二步法制备了丙烯腈(AN)/甲基丙烯酸(MAA)共聚物泡沫塑料。
5)  methylacrylic acid
甲基丙烯酸
1.
Effect of methylacrylic acid modified carbon black on properties of natural rubber and butadiene rubber;
甲基丙烯酸固态原位接枝改性炭黑对天然橡胶和顺丁橡胶性能的影响
2.
Study on copolymerization kinetics of methylacrylic acid and sodium p-styrene sulfonate;
甲基丙烯酸和对苯乙烯磺酸钠共聚反应动力学研究
3.
Study on the application of low temperature air plasma in PET fiber grafting with methylacrylic acid
低温等离子体在PET纤维接枝甲基丙烯酸中的应用研究
6)  MAA
甲基丙烯酸
1.
Application of AA and MAA in self-thickening poly (MMA-BA) emulsion;
丙烯酸、甲基丙烯酸在自增稠乳液中应用分析
2.
The effect of nano-calcium carbonate in-situ modified by MAA on the properties of SBR compound was experimentally investigated.
试验研究甲基丙烯酸(MAA)原位改性纳米碳酸钙对SBR胶料性能的影响。
3.
The foromulation and properties of poly(MMA-BA)emulsion copolyed by AA and MAA were researched.
本文分析了丙烯酸、甲基丙烯酸在丙烯酸丁酯、甲基丙烯酸甲酯共聚乳液中的影响,尤其自增稠特性。
补充资料:a-甲基丙烯酸
分子式:C4H6O2
分子量:86.09
CAS号:79-41-4

性质:常温下为无色透明可燃液体。熔点14℃,沸点159-163℃(100kPa),相对密度1.0153(20/4℃),折射率为1.4314,闪点77℃,粘度(25℃)1.3mPa·s。易溶于热水、乙醇及大多数有机溶剂。容易聚合形成水溶性聚合物。能与空气形成爆炸混合物,爆炸极限为2.1%-12.5%。

制备方法:甲基丙烯酸的工业生产方法主要有两种,即丙酮氰醇法是异丁烯(叔丁醇)氧化法。1.丙酮氰醇法 丙酮和氢氰酸在碱催化剂存在下,反应生成丙酮氰醇,再与浓硫酸反应生成甲基丙烯酰胺硫酸盐,然后经水解即可生成甲基丙烯酸。生产中要求丙酮氰醇和硫酸中不含水分,否则会产生丙酮或α-羟基异丁酸甲酯留在产品中,影响产品质量。用丙酮氰醇法生产甲基丙烯酸,每吨产品消耗氰化钠(>87%)898kg、丙酮(98.5%)1100kg、硫酸(发烟)4080kg。2.异丁烯(叔丁醇)氧化法 异丁烯经两步氧化,第一步生成甲基丙烯醛,第二步生成甲基丙烯酸,然后经精馏得到合格产品。3.甲基丙烯腈水解法以异丁烯为原料,经氨氧、水解而得。4.异丁烷氧化法经氧化制得甲基丙烯醛,再经氧化而得。

用途:重要的有机化工原料和聚合物的中间体。其最重要的衍生产品甲基丙烯酸甲酯生产的有机玻璃可用于飞机和民用建筑的窗户,也可加工成纽扣,太阳滤光镜和汽车灯透镜等;生产的涂料具有优越的悬浮、流变和耐久特性;制成的粘结剂可用于金属、皮革、塑料和建筑材料的粘合;甲基丙烯酸酯聚合物乳液用作织物整理剂和抗静电剂。另外,甲基丙烯酸还可作为合成橡胶的原料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条