1) two grouting machine
双注浆机
2) Two-shot grouting
双液注浆
1.
Design and application of new anti-aqueous dispersions and anti-aqueous solubility two-shot grouting material;
新型抗水分散和抗水溶蚀双液注浆材料的设计与应用
2.
Workability and gelling performance of new two-shot grouting material with anti-aqueous dispersion and anti-aqueous solubility;
新型抗水分散和抗水溶蚀双液注浆材料的工作性能及胶凝性能
3.
Traditional cement-sodium-silicate two-shot grouting materials was widely applied to filling, soil stabilization, strengthening and mitigation of water ingress to underground facilities due to its characteristics of rapid and adjustable gel-time and good working performance etc.
传统水泥-水玻璃双液注浆材料凝胶迅速,工作性能良好,被广泛应用于填充、加固、防水堵漏等工程中。
3) double liquid grouting
双液注浆
1.
Application of double liquid grouting technology to strengthening bridge pile foundation on existing Guang-Shen line;
双液注浆工艺在既有广深桥桩基加固中的应用
2.
This article introduces deep foundation pit emergency repair of a high-rise building of Tianjin,using rigid fast-hardening water-stopping material on its negative side and double liquid grouting material on its positive side.
针对天津市区某高层建筑深基坑发生漏水涌砂的险情,介绍了在基坑内侧采用快硬性刚性止水材料堵漏和基坑外侧采用双液注浆堵漏的抢险措施。
3.
Combined with the construction in the section of water gushing at the entrance of Zhoucangling tunnel,the author introduces that man can achieve the expected effect of water gushing control with the method combining long borehold detection,lead small conduit pre-support with double liquid grouting,which solve the problem of water gushing in tunnel.
介绍了周仓岭隧道出口涌水段施工中,采用长钻孔探测、超前小导管预支护、双液注浆相结合的方法,达到了预期的治理涌水的效果,解决了隧道涌水的难题。
4) time for injecting
注浆时机
1.
Under the consideration of the developing degree of fracture ,the strength of the injecting bulk, the deformation to be controlled , the injecting technology etc,we determined the best time for injecting to reinfor.
对松散破碎以及软弱围岩巷道进行注浆加固巷道围岩时,注浆时机的选择对注浆效果具有很大的影响。
5) grouting mechanism
注浆机理
1.
With practical engineering examples,the application of the technology of base grouting in the Tianjin area is introduced in the paper from the angles of the grouting mechanism,construction parameters(grouting content,grouting pressure,grout mixing,grouting time),and construction processes.
通过工程实例,从注浆机理、施工参数(压浆量、压浆压力、浆液配制、压浆时间)、施工工序等方面介绍了桩端压浆技术在天津地区的应用。
6) grouting machine
注浆机械
补充资料:电泳注浆成型
分子式:
CAS号:
性质:陶瓷浆料的成型方法之一。利用浆料中颗粒荷负电,在直流电场作用下向阳极运动而沉积在模型(阳极)上形成坯体的成型方法。此法可加快坯体形成速度,坯体较致密,可用于面砖,基板等的成型,但有时会因水的电解作用产生气泡,电场不均匀会造成坯体厚薄不均或脱模困难,故尚未得到广泛使用。
CAS号:
性质:陶瓷浆料的成型方法之一。利用浆料中颗粒荷负电,在直流电场作用下向阳极运动而沉积在模型(阳极)上形成坯体的成型方法。此法可加快坯体形成速度,坯体较致密,可用于面砖,基板等的成型,但有时会因水的电解作用产生气泡,电场不均匀会造成坯体厚薄不均或脱模困难,故尚未得到广泛使用。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条