1) Ti and Ti-Mo alloy
Ti以及Ti-Mo合金
2) Ti-Mo alloy
Ti-Mo合金
1.
Based on the calculated results,the influences of Mo contents on theβphase stability and elastic property of Ti-Mo alloys were investigated.
5%的Ti-Mo二元合金的能量、电子结构以及弹性性质进行了理论计算,研究了Mo含量对Ti-Mo合金的β结构稳定性和弹性性质的影响。
2.
The density, Vickers hardness, compressive strength, elastic modulus and bending strength of the Ti-Mo alloy were examined by adding Mo into pure Ti to prepare the binary alloy.
在纯钛中加入Mo元素制成二元Ti-Mo合金,测定了Ti-Mo合金的密度、维氏硬度、抗压强度、弹性模量及抗弯强度等性能。
3) Ti-Mo alloys
Ti-Mo合金
1.
Structure and properties of a series of binary Ti-Mo alloys with molybdenum contents ranging from 5% to 20% have been investigated.
对不同Mo含量(5%、10%、15%和20%,质量分数)的二元Ti-Mo合金的显微组织和机械性能进行了研究。
4) Mo-Ti alloy
Mo-Ti合金
1.
Effects of Ti on tensile strength and microstructure of Mo-Ti alloy;
Ti对Mo-Ti合金拉伸强度及显微组织的影响
2.
Mo-Zr and Mo-Ti alloy were fabricated by powder metallurgy process, the effect of the adding forms and addition amount of Zr, Ti on the tensile property and microstructure of the alloy were studied.
采用粉末冶金法制备Mo-Zr、Mo-Ti合金,研究了Zr、Ti的添加方式及添加量对Mo的拉伸性能和显微组织的影响。
3.
Mo-Ti alloy with 0.
0%的Mo-Ti合金。
5) Mo-Ti-Zr alloy
Mo-Ti-Zr合金
1.
Influence of (Mo, Zr, Ti)_xO_y particles on mechanical properties and microstructure of rotary forging Mo-Ti-Zr alloy;
(Mo,Zr,Ti)_xO_y粒子对旋锻Mo-Ti-Zr合金性能和组织的影响
6) Ti-Mo alloy hydride
Ti-Mo合金氢化物
1.
Microscopic defects in Ti-Mo alloy hydrides studied by small-angle X-ray scattering;
Ti-Mo合金氢化物微观缺陷的小角X射线散射研究
补充资料：Ti-8Ai-1Mo-1V alloy
分子式：
CAS号：
性质：为近α钛合金。成分铝8％，钼、钒各1％，余量钛。加铝稳定α相，加钼、钒稳定β相。室温抗拉强度896MPa，屈服强度827MPa，延伸率10％，杨氏模量2700GPa，冲击韧性20.3～33.9J，疲劳极限565MPa。采用真空自耗电弧炉熔炼。用于制造航天航空用零部件。
CAS号：
性质：为近α钛合金。成分铝8％，钼、钒各1％，余量钛。加铝稳定α相，加钼、钒稳定β相。室温抗拉强度896MPa，屈服强度827MPa，延伸率10％，杨氏模量2700GPa，冲击韧性20.3～33.9J，疲劳极限565MPa。采用真空自耗电弧炉熔炼。用于制造航天航空用零部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条