1) Pre-Oxidation Algae Removal
预氧化除藻
2) oxygenic inspiration
预氧
3) pre-oxidation
预氧化
1.
Effect of substrate pre-oxidation on SiO_2/S composite coating deposited on HP40 alloy;
基底表面预氧化对SiO_2/S复合涂层的影响
2.
Research on Treating Slight-polluted Source Water by Pre-oxidation of Potassium Permanganate & Sodium Hypochlorite and Conventinal Process;
高锰酸钾、次氯酸钠复合预氧化与常规处理工艺联用处理微污染水源水的中试研究
3.
Test of effect of pre-oxidation on coagulation efficiency;
化学预氧化对混凝效果的影响试验
4) preoxidation
预氧化
1.
Effect of preoxidation temperature on core/shell structure during the preoxidation procession of PAN fibers;
预氧化温度对聚丙烯腈纤维皮芯结构形成的影响
2.
Study on properties in the preoxidation of PAN fiber;
腈纶纤维预氧化过程性能研究
3.
Study on preoxidation process of polyacrylonitrile precursor;
聚丙烯腈原丝的预氧化过程研究
5) fore-oxidized ore
预氧化矿
1.
Through comparing different effects of Panzhihua ilmenite and fore-oxidized ore on the grade of thick synthetic rutile and the pulverization rate of product after acid leaching,it is described that fore-oxidation has functions of improving the grade of thick synthetic rutile and reducing the pulverization rate of products.
论述了预氧化机理、酸浸反应机理和细化机理,并通过攀枝花钛铁矿与预氧化矿在1000t/a生产装备上的对比试验,考察了两种矿对酸浸后粗金红石品位及产品细料率的影响,阐明了预氧化有提高粗金红石品位、降低产品细料率的作用。
6) preoxidation furnace
预氧化炉
1.
A new type offluidized preoxidation furnace was designed in this paper based on characteristics of PAN base carbon fiber production process.
根据PAN基碳纤维生产的特点,设计了一种新型流态化预氧化炉,并对其关键部件的特点与作用以及流态化粒子的选择作了系统描述。
2.
In order to resolve the present shortcomings of preoxidation during carbon fiber production process such as preoxidation technology taking too much time, lower production volume and higher energy consumption etc, we designed a new type of fluidized preoxidation furnace by adopting fluidization technology and studied the fluidized preoxidation feasibility of PAN based carbon fiber.
本文首先分析了国内外PAN基碳纤维预氧化现状，针对预氧化工艺在碳纤维生产过程所占时间长，影响碳纤维的产量和成本等问题，本文采用流态化技术，设计了一种新型PAN基碳纤维用流态化预氧化炉，研究了PAN基碳纤维流态化预氧化可行性。
参考词条
补充资料：磁性氧化铁环氧预涂底漆
分子式：
CAS号：
性质：是以环氧酯为主要成膜物，以磁性氧化铁为防锈颜料制成的车间预涂底漆。漆膜呈银棕色、平整无光。采用喷涂、辊涂；无空气高压喷涂施工。主要用于造船工业、铁路机车工业及钢结构件抛丸自动除锈喷涂底漆流水作业线。可与醇酸底漆、环氧底漆、硝基底膝及氯化氯丁胶底漆配套使用。
CAS号：
性质：是以环氧酯为主要成膜物，以磁性氧化铁为防锈颜料制成的车间预涂底漆。漆膜呈银棕色、平整无光。采用喷涂、辊涂；无空气高压喷涂施工。主要用于造船工业、铁路机车工业及钢结构件抛丸自动除锈喷涂底漆流水作业线。可与醇酸底漆、环氧底漆、硝基底膝及氯化氯丁胶底漆配套使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。