1) simply supported annular plate
简支环板
1.
By Mises yield criteria , the limit loads of simply supported annular plate under the combined action of linear load and uniform load are investigated.
本文应用Mises屈服条件分析外边界简支环板在线性荷载与均布荷载共同作用下的极限荷载。
2) simply supported annular plate on inner boundary
内边界简支环板
1.
Limit load for simply supported annular plate on inner boundary by using Mises yield condition;
用Mises屈服条件求内边界简支环板在线性荷载作用下的极限荷载
3) simple beams and slabs
简支梁板
1.
Law of stress increment in unbonded tendons for concrete simple beams and slabs;
预应力混凝土简支梁板中无粘结筋应力增长规律
4) simply supported circular plate
简支圆板
1.
The plastic critical analysis of simply supported circular plates based on unified yield criterion under linear and uniformly distributed load was carried out,and two forms of loads were considered.
采用统一屈服准则对线性和均布荷载共同作用下的简支圆板进行了塑性极限分析,并考虑了2种荷载形式,分别得出了极限解的表达式。
2.
This paper has analyzed the dynamic plastic response of simply supported circular plate under explosive load by using twins shear strength theory considered the strength-differential effect.
采用双剪应力强度理论,考虑材料的拉压强度比,求解了简支圆板在爆炸冲击荷载波荷载作用下的动力响应问题。
3.
The dynamic response of a simply supported circular plate under moderate impulsive loading is solved with the unified strength theory.
采用统一强度理论求解了简支圆板在中等脉冲荷载作用下的动力响应问题,得出了统一的动力塑性极限荷载、内力场和速度场,并给出了上限解和下限解。
5) simply supported slab
简支板带
1.
Experimental study on simply supported slab of reinforced concrete stiffening ribbed hollow pipe girderless floor;
加劲肋空心管钢筋混凝土无梁楼盖简支板带试验研究
6) simply-supported slab
简支板
1.
The shape function of deflection of simply-supported slab is constructed by solving analytic expression of deflection of the beam supported by interior elastic point.
通过求解内部为弹性点支承的梁的挠度解析表达式构造了简支板挠度的试函数,利用Galerkin法,建立了内部为弹性点支承的简支板的近似分析方法,并求解了内部为弹性点支承简支板的挠度和弯矩的一组近似解。
补充资料：双(2,3-环氧环戊基)醚玻璃布层合板
分子式：
CAS号：
性质：以双(2,3-环氧环戊基)醚为基料的层合板。马丁耐热270℃。拉伸强度371MPa。弯曲强度487MPa。冲击强度125kJ／m2。体积电阻率l.18×1015Ω·cm。将双(2,3-环氧环戊基)醚与固化剂等制成胶液或B阶树脂后,充分浸渍玻璃布,再叠层并层合即得。主要用作航空航天器材、电子元件和体育器材等。
CAS号：
性质：以双(2,3-环氧环戊基)醚为基料的层合板。马丁耐热270℃。拉伸强度371MPa。弯曲强度487MPa。冲击强度125kJ／m2。体积电阻率l.18×1015Ω·cm。将双(2,3-环氧环戊基)醚与固化剂等制成胶液或B阶树脂后,充分浸渍玻璃布,再叠层并层合即得。主要用作航空航天器材、电子元件和体育器材等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条