1) loading at normal temperature
常温加载
1.
The model includes loading at normal temperature and elevating temperature at constant load.
它包括常温加载和恒载升温两阶段,编制了计算机程序,与国外的实验相比,符合较好。
2) normal temperature and higher pressure
常温加压
1.
Different behaviours and risk for LPG at normal temperature and higher pressure as well as at lower temperature and normal pressure were analyzed,and potential fire and explosion consequence was assumed.
分别分析了LPG常温加压和低温常压储存的不同特点和LPG储存过程中的危险性和各种可能出现的火灾爆炸事故后果;设定了常见的LPG储存泄漏时效模式,运用PHAST软件模拟分析了LPG常温加压和低温常压储存的各种火灾爆炸事故的危害范围;比较两种储存条件下的危害后果,得出了LPG低温常压储存具有更高的安全性和经济性。
3) steady state test
恒温加载
1.
To investigate the mechanical properties of the Q345(16Mn)steel made in China,steady state tests were carried out by using computer controlled test machine,heating device and specially designed deformation measuring appliance,with the 152 steel specimens coming from 10 factories.
为了对我国钢结构耐火设计提供基础数据,利用微机控制电液伺服试验机及加温装置和特别设计的变形测量装置,采用恒温加载试验方法,对国产10个钢厂生产的钢结构用Q345(16Mn)钢进行了152次试验研究,揭示了钢材在600℃范围内的力学性能变化规律和离散性,采用割交点法定义钢材的屈服强度,建立了钢材在恒温加载路径下的初始弹性模量、屈服强度和线膨胀系数计算模型。
4) Loading under constant temperature
恒温加载
1.
By using WAW-1000 computer control testing machine,heating device and specially designed deformation measuring appliance,22 times experiments have been carried out to investigate the mechanical behaviors of structural steel A3 at elevated temperatures by adopting loading under constant temperature test and heating under constant load test.
利用W AW-1000微机控制万能试验机、加温装置及变形测量装置,分别采用恒温加载和恒载加温两种试验方法,对我国某钢厂生产的A3钢在高温下的力学性能进行了22次试验,为我国钢结构建筑耐火设计提供重要的基础数据。
5) heat after being constantly loaded
恒载加温
1.
And gained the critical load level at differ temperature under heat after being constantly loaded.
通过对国产某种低合金结构钢(16Mn)的高温试验研究,得到此种结构钢在恒温加载下强度折减系数随着温度的变化规律,以及在恒载加温条件及不同温度下的临界荷载水平,为钢结构建筑耐火设计提供了重要的基础数据。
6) load after being heated
恒温加载
1.
Obtained the change rules of strength fall coefficient with temperature under load after being heated.
通过对国产某种低合金结构钢(16Mn)的高温试验研究,得到此种结构钢在恒温加载下强度折减系数随着温度的变化规律,以及在恒载加温条件及不同温度下的临界荷载水平,为钢结构建筑耐火设计提供了重要的基础数据。
补充资料：自动加载下载的*.dmt材质方法
自动加载下载的*.dmt材质方法一
1、建立如下路径的文件夹：
E:\graphiclib\graphic-library\
然后把你下载的adv_materials文件夹（里面材质了）放到刚才建立的路径里，变成如下路径
E:\graphiclib\graphic-library\adv_materials
2、如图配制搜索路径
3、这样调用！点PHOTOLUX材质库
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条