1) pre-imbedded slim-hole
预埋小孔径
2) prepared hole-diameter
预加工小孔孔径
1.
Through FEM numerical simulation of flanging process which was carried out with ABAQUS software,the cognition that flanging process can be divided into 4 stages,the dynamic process of flanging,the method of computing for the prepared hole-diameter,the material thickness transformation of deformation area and the characteristic of effective stress distribution,etc.
利用有限元分析软件ABAQUS,对圆孔翻边成形过程进行了数值模拟,获得了翻边变形可以分为4个阶段的细观认识及其动态过程、翻边预加工小孔孔径的分析计算方法、变形区料厚变化情况以及等效应力分布与特点等。
4) small hole and shallow blasting
小孔径浅孔
1.
For the reason of small amount of detonating powder, the small hole and shallow blasting brings about small vibration and impact to the side slope, favouring to the stability and safety of the side slope and imposing slight influence on the surface of foundation rock.
小孔径浅孔爆破的起爆药量小 ,爆破对周边的振动与冲击较小 ,有利于边坡的稳定与安全 ,对建基面的爆破影响很小 ,且容易控制超、欠开挖量 ,保证开挖精度 ,在永久船闸二期工程的高直立边坡的成形开挖、底部保护层开挖中得到很好的运用。
6) pore size
孔径大小
1.
Effect of support pore size on integrity of Al_2O_3 micro-filtration membranes;
支撑体孔径大小对Al_2O_3微滤膜完整性的影响
2.
A method based on the surface force pore flow model to characterize the pore size and pore size distribution of polymer porous filtration membranes was reviewed.
综述了一种建立在表面作用力孔流通模型基础上计算高分子多孔滤过膜孔径大小及分布的方法。
3.
The results demonstrate that the average pore size of nature.
5nm的沉积物体系中甲烷水合物的分解平衡温度和压力条件(即相平衡)进行了测定,结果表明,近自然沉积物的平均孔径大小会影响甲烷水合物的相平衡条件。
补充资料：设备安装前的准备工作——设备的预装配与预调整
设备安装前的准备工作——设备的预装配与预调整 | ||
|
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条