1) slurry valve
浆液阀
1.
Research and application of hydraulically controlled slurry valve;
液动浆液阀的研制与应用
3) size
[英][saɪz] [美][saɪz]
浆液
1.
A study on improving size adhesion by high-speed shearing homogenization;
高速剪切均质改善浆液黏附力的研究
2.
Test of Size Property and Size Film Property of Cationic Starch;
阳离子淀粉浆液浆膜性能试验
3.
Size Film Property of Polyacrylic Acid Size;
聚丙烯酸类浆料的浆液浆膜性能
4) slurry
[英]['slʌri] [美]['slɝɪ]
浆液
1.
SO_2 removal by slurry of coal-waste rocks;
煤矸石浆液脱除燃煤烟气中SO_2的研究
2.
Studies on Preparation of LLDPE Slurry Catalyst;
LLDPE浆液催化剂制备研究
3.
Stabilization of PP/CMC Aqueous Slurry and Process of Aging of Laying for Rotational Moulding;
塑料旋转成型用PP/CMC浆液体系稳定性机理的研究
5) grout
[英][ɡraʊt] [美][graut]
浆液
1.
Porous grout pressure modeling in mending shaft-lining ruptures;
井壁破坏注浆治理中的浆液孔隙压强模型
2.
Considering the significance of grout’s dispersion in running ground water in the aquifers, a hydrodynamic dispersion model of liquid solute is presented to characterize grout transport in salvation course of ruptured shaft linings, and an analytical solution of grout concentration in radial flow is developed by coordinate conversion.
采用液体溶质水动力弥散方程及其相应分析方法描述治理破裂井筒注浆的浆液运移过程 ,通过坐标变换推导出径向水流条件下考虑吸附作用的浆液浓度解析公式。
3.
To improve and evaluate the effect of grouting,and to study and predict the pervasion law of grouts in space fracture network of rock mass,a seepage model for the Binghamian grouts flowing in space fracture network was put forward combining with the flow formula of Binghamian grouts in single smooth and inclined fracture.
为提高和评估岩体灌浆效果,研究和预测浆液在空间岩体裂隙网络内的渗透规律,结合宾汉流体在单一光滑倾斜裂隙内的流动公式,建立了空间岩体裂隙网络的宾汉浆液渗流和裂隙变形耦合模型。
6) serous
[英]['sirəs] [美]['sɪrəs]
浆液
1.
Hypoxia and new tumor angiogenesis correlated with tumor petitoneal metastases and prognosis in advanced serous ovarian cancer;
缺氧和新生血管生成与晚期卵巢浆液性癌腹膜播散及预后相关性的研究
2.
Objective To evaluate the effect of postoperative intraperitoneal combined with intravenous chemotherapy for ovarian serous cystadenocarcinoma patients.
目的探讨Ⅱ期以上卵巢浆液性囊腺癌患者术后行腹腔持续灌注联合双途径化疗的临床疗效。
3.
[Purpose] To explore the relationship between expression of CLN3 gene and its biological behaviors in ovarian serous cancer.
[目的]探讨CLN3基因在卵巢浆液性囊腺癌中的表达特点及与其生物学行为的关系。
补充资料：溢流阀、顺序阀、减压阀的比较
溢流阀 | 减压阀 | 顺序阀 | ||
控制油路的特点 | 通过调整弹簧的压力控制进油路的压力，保证进口压力恒定，p2＝0 | 通过调整弹簧的压力控制出油口的压力，保证出口压力p2稳定 | 直控式－通过调定调压弹簧的压力控制进油路压力；夜控式－由单独油路控制压力 | |
出油口情况 | 出油口与油箱相连 | 出油口与减压回路相连 | 出油口与工作回路相连 | |
泄漏形式 | 内泄式 | 外泄式 | 内泄式 | |
进油口状态及压力值 | 常态 | 常闭（原始状态） | 常开（原始状态） | 常闭（原始状态） |
工作状态 | 进出油口相通，进油口压力为调整压力 | 进油口压力低于出油口压力，出油口压力稳定在调定值上 | 进出油口相通，进油口压力允许继续升高 | |
联接方式 | 并联 | 串联 | 实现顺序动作式串联作卸荷阀用时并联 | |
功用 | 定压、溢流或安全作用限压、稳压、保压 | 减压、稳压 | 不控制系统的压力，只利用系统的压力变化控制油路的通断 | |
进油腔压力p1控制阀芯移动 | 出油腔压力p2控制阀芯移动 | 进油腔压力p1控制阀芯移动 | ||
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条