活塞排量,Piston displacement,在线英语词典,英文翻译,专业英语

1) Piston displacement

活塞排量

2) Piston displacement of high pressure stage

高压级活塞排量

3) piston

活塞

Microstructure and Mechanical Properties of BH22 Piston Alloy in Squeezing Casting;

挤压铸造BH122活塞合金的显微组织与力学性能

Research On Machining Principle For Non-Cylinder Piston Pin Hole Based on GMM;

基于GMM的活塞异形销孔加工原理研究

Research on On-site Measurement of Middle-bulged Varying Ellipse Profile of Piston Skirt;

活塞裙部中凸变椭圆型面在位检测的研究

4) pistons

活塞

Squeeze casting has been used for the shaping of comparatively large sized pistons made of hypereutectic aluminum-silicon alloys(silicon content between 16% to 20%).

采用挤压铸造的方法，作为尺寸较大的过共晶铝硅合金（含硅１６％～２０％）活塞的成型工艺。

The authors study the wear curve of cutting tools and the surface roughness of motorcycle pistons on hypereutectic Al-22%Si alloy,and discuss the influence of several machining factors on the machinability of hypereutectic Al -22%Si alloy, such as the materials of tools, the geometric shapes of cutting blade and the machining parameter.

探讨了高硅铝AL—22%Si合金摩托车活塞切削加工时刀具的磨损规律和工件表面粗糙度的影响;讨论了刀具材料、切削刃几何参数和切削用量对该材料切削的影响规律。

Compared with the conventional materials(ZL108,ZL109), SiCp/ZL108 composite has better physical and mechanical properties and is an ideal material for motorcycle pistons.

研究采用铸造旋涡法制造ＳｉＣｐ／ＺＬ１０８复合材料的工艺，重点探讨铝液温度、颗粒表面处理及合金元素（Ｍｇ、Ｂ、Ｔｉ）对颗粒的回收率和分布的影响；与传统的活塞材料（ＺＬ１０８，ＺＬ１０９）相比，该材料具有优良的机械性能和物理性能，是摩托车活塞的理想材料。

5) piston and rings

活塞与活塞环

The surfaces of piston and rings of SANTAN JV gasoline engine were tribologically modified by means of rare earth self-lubrication, and the clearances of the piston skirt to cylinder and ring gaps were modified to -5~2 μm and 150 μm, respectively.

采用稀土自润滑表面处理技术对桑塔纳 JV汽油发动机活塞与活塞环表面进行处理 ,并对原机进行活塞与汽缸、活塞环端口的超小间隙改造 (配缸间隙 - 5～ 2μm,活塞环开口 15 0μm ) ,通过台架试验对超小间隙发动机抗拉缸性能和摩擦功耗进行了考察 ;通过原子力显微镜对活塞表面的微观形貌和摩擦力进行了测试。

6) Piston and ring

活塞和活塞环

参考词条

活塞作用活塞尾活塞头活塞效应活塞流活塞环槽小活塞杆活塞传压活塞销铝活塞活塞浇注 ZL109活塞双活塞愈腹茧蜂属结束输出

补充资料：低心排血量综合征

低心排血量综合征
lowcardiac output syndrome

指由于心脏排血量下降而出现多脏器灌注不足、组织缺氧的复杂病理生理变化。病因主要是低血容量、心包压塞、心律失常、心力衰竭和手术矫正畸形不满意。表现为神志淡漠、末梢性发绀、动脉压降低，尿少、血氧分压降低。根据典型症状和体征，参考心脏指数低于1.5L/(min·m2)〔小儿低于2.0L/(min·m2)〕可确诊。治疗原则为对症综合治疗。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引活塞杆活塞风活塞环减震活塞活塞风速磨损活塞

1) Piston displacement 活塞排量 2) Piston displacement of high pressure stage 高压级活塞排量 3) piston 活塞 1. Microstructure and Mechanical Properties of BH22 Piston Alloy in Squeezing Casting; 挤压铸造BH122活塞合金的显微组织与力学性能 2. Research On Machining Principle For Non-Cylinder Piston Pin Hole Based on GMM; 基于GMM的活塞异形销孔加工原理研究 3. Research on On-site Measurement of Middle-bulged Varying Ellipse Profile of Piston Skirt; 活塞裙部中凸变椭圆型面在位检测的研究 4) pistons 活塞 1. Squeeze casting has been used for the shaping of comparatively large sized pistons made of hypereutectic aluminum-silicon alloys(silicon content between 16% to 20%). 采用挤压铸造的方法，作为尺寸较大的过共晶铝硅合金（含硅１６％～２０％）活塞的成型工艺。 2. The authors study the wear curve of cutting tools and the surface roughness of motorcycle pistons on hypereutectic Al-22%Si alloy,and discuss the influence of several machining factors on the machinability of hypereutectic Al -22%Si alloy, such as the materials of tools, the geometric shapes of cutting blade and the machining parameter. 探讨了高硅铝AL—22%Si合金摩托车活塞切削加工时刀具的磨损规律和工件表面粗糙度的影响;讨论了刀具材料、切削刃几何参数和切削用量对该材料切削的影响规律。 3. Compared with the conventional materials(ZL108,ZL109), SiCp/ZL108 composite has better physical and mechanical properties and is an ideal material for motorcycle pistons. 研究采用铸造旋涡法制造ＳｉＣｐ／ＺＬ１０８复合材料的工艺，重点探讨铝液温度、颗粒表面处理及合金元素（Ｍｇ、Ｂ、Ｔｉ）对颗粒的回收率和分布的影响；与传统的活塞材料（ＺＬ１０８，ＺＬ１０９）相比，该材料具有优良的机械性能和物理性能，是摩托车活塞的理想材料。 5) piston and rings 活塞与活塞环 1. The surfaces of piston and rings of SANTAN JV gasoline engine were tribologically modified by means of rare earth self-lubrication, and the clearances of the piston skirt to cylinder and ring gaps were modified to -5~2 μm and 150 μm, respectively. 采用稀土自润滑表面处理技术对桑塔纳 JV汽油发动机活塞与活塞环表面进行处理 ,并对原机进行活塞与汽缸、活塞环端口的超小间隙改造 (配缸间隙 - 5～ 2μm,活塞环开口 15 0μm ) ,通过台架试验对超小间隙发动机抗拉缸性能和摩擦功耗进行了考察 ;通过原子力显微镜对活塞表面的微观形貌和摩擦力进行了测试。 6) Piston and ring 活塞和活塞环参考词条活塞作用活塞尾活塞头活塞效应活塞流活塞环槽小活塞杆活塞传压活塞销铝活塞活塞浇注 ZL109活塞双活塞愈腹茧蜂属结束输出补充资料：低心排血量综合征低心排血量综合征 lowcardiac output syndrome 指由于心脏排血量下降而出现多脏器灌注不足、组织缺氧的复杂病理生理变化。病因主要是低血容量、心包压塞、心律失常、心力衰竭和手术矫正畸形不满意。表现为神志淡漠、末梢性发绀、动脉压降低，尿少、血氧分压降低。根据典型症状和体征，参考心脏指数低于1.5L/(min·m2)〔小儿低于2.0L/(min·m2)〕可确诊。治疗原则为对症综合治疗。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com