1) pre-stressed box simple girder with wide span
预应力简支箱梁
1.
The pre-stressed box simple girder with wide span is a key structure for the road project accessing to power station and dam gates of the Jinghui channel irrigation district.
泾惠渠渠首大跨度预应力简支箱梁工程属于渠首电站及大坝拦河闸门附属检修道路工程的关键建筑物,其质量优劣直接影响着电站检修车辆、设备的安全运输。
2) prestrain
预应变
1.
Effect of prestrain on impact toughness and ductile-brittle transition temperature of welded joint;
预应变下焊接接头冲击韧度及韧—脆转变的分析
2.
The Experimental Study on Mechanical Behaviour of Prestrain A3 Steel;
预应变A3钢的力学性能实验研究
3.
The effect of prestrain on the reverse martensitic transformation of TiNi shape memory alloy fibers embedded in an Al matrix has been studied by differential scanning calorimeter(DSC),X-ray diffraction(XRD) and scanning electron microscope(SEM) methods.
采用示差扫描热分析(DSC)、X射线衍射(XRD)和扫描电子显微分析(SEM)等方法,研究了预应变对铝基体中复合的TiNi形状记忆合金丝的马氏体逆相变的影响。
3) prestress ring
预应力环
4) pre-strain
预应变量
1.
The effect of pre-strain on shape recovery strain in an Fe-25%Mn-4.
5%Si-1%Cr-2%Ni合金预应变对可恢复应变量的影响,并用X射线衍射分析方法考察了应力诱发ε马氏体(εM)体积分数随预应变量的变化关系。
2.
The effect of the pre-strain and technique of heating and cooing on the recovery stress of Fe-Mn-Si-CrNi-C shape memory alloy has been studied.
研究了预应变量、加热和冷却工艺对FeMn－Si-Cr－Ni－C形状记忆合金回复应力的影响。
5) pre-strain
预应变
1.
Influence of pre-strain on fracture behavior of notched specimen of alloy steel with different graininess;
预应变对不同晶粒度合金钢缺口试样断裂行为的影响
2.
In these experiments,specimens were bending to produce different pre-strain respectively,and then reverse bending were taken one by one.
在各弯曲试样得到不同的预应变后,又对其进行反向加载,记录不同预应变下各试样反向加载的弯矩随表面应变的变化曲线。
3.
It is not unloaded until the given pre-strain value is reached.
在不同预变形下对几个试件分别进行加载,当达到给定的预应变值时就卸载,随后再进行反向加载试验,记录其屈服强度。
6) prestress
预应力
1.
Application of prestress truss cable in large cross section coal roadway;
大断面煤巷预应力桁架锚索的理论与实践
2.
The method of prestressing electrode thread on WEDM;
快走丝线切割电极丝的预应力法张紧
3.
Research and experiment upon prestressed pull-straightening roller in CCM using photoelastic method;
连铸机预应力拉矫辊的光弹性实验研究
参考词条
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。