1) decollement fault
滑覆
1.
It mainly shows that it has some relation between certain time, certain space, certain type structure and coal -bearing zone saving produced from decollement fault and nappe structure and its concentration.
本文通过龙永煤田聚煤盆地成煤前构造特征、成煤后构造演化及富煤带形成机理分析,发现聚煤盆地构造演化与富煤带保存有一定的相关性,主要表现在一定时期、一定空间、一定样式的构造与一定层段的富煤带在走向、倾向上,具有一定的相关性,即一定富煤带产生在一定滑覆、推覆及其组合中。
2) decollement thrust
滑脱推覆
1.
This paper describes detailedly the characteristics of decollement thrust zone both in plane and in section of Mesozoic Cenozoic rocks in the Kuche depression in the south foreland North Tarim basin by an analysis of the geophysical and geological data available.
本文据地震和地质观察资料，解释和阐述了塔里木盆地北部前陆区库车坳陷中、新生界滑脱推覆构造平面、剖面特征，结合前缘隆起区有关资料，提出了库车坳陷滑脱推覆构造的成因机制，并对库车坳陷油气进行了初步评价，认为秋里塔克弧形构造内侧断弯褶皱、楔状三角体及推覆构造前缘盐构造控油有
3) gliding nappe
滑覆构造
1.
On the basis of analysing the structural features and the genetic mechanism of nappe, gliding nappe and fault-block structures in Linru Coalfield, Hexichen, Wenquan Street and the deep part of Chaochuan mining area are considered as the favourable districts for tracing coal.
在分析临汝煤田的推覆构造、滑覆构造及断块构造特征和成因机制的基础上,指出了河西陈、温泉街、朝川矿区深部等找煤的有利区段。
4) sliding nappe
推覆-滑动
5) gliding nappe structure
滑覆构造
1.
Wangxia gliding nappe structure was formed with the forcing intrusion of Bawan-glin superunit granite in western Hainan.
琼西王下滑覆构造是由坝王岭超单元花岗岩的强力侵位而形成的。
2.
Not only are the extending structures well developed with- in the area,but the gliding nappe structures are found in Dongfangling.
地处阜平、赞皇两个变质核杂岩体之间的南坡庄——井陉地区,不但在广大地区发育伸展构造,而且在东方岭地区发育滑覆构造。
3.
Start with kneading effect of thrust nappe and gliding nappe structures to coal seams and plugging effect of thrusting compressional structure to coal seam gas,discussed control and impact of tectonics to gas distribution in No.
从推覆、滑覆构造对煤层的揉搓作用与逆冲挤压构造对煤层瓦斯的封闭作用入手,探讨该区域地质构造对二1煤层瓦斯分布的控制与影响。
6) gliding nappe
滑覆体
1.
This paper describes the deformational feature of the DayudongJiudianpingLongxi gliding nappe in the PengGuau area, western Sichuan.
论述了彭灌地区大鱼洞—九甸坪—龙溪滑覆体的构造变形特征,将其划分为南北两个滑覆体,二者以侧向镶嵌方式相连。
2.
According to the internal structural features and the mechanical origin, this paper devides the klippen in Peng County into two kinds:thruSt nappe and gliding nappe.
彭县地区飞来峰根据其内部构造特征和力学成因可分为两类──推覆体和滑覆体。
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条