1) residue carbon of biomass pyrolysis
裂解残炭
1.
In this paper, activated carbon is prepared by residue carbon of biomass pyrolysis.
本实验以生物质裂解残炭为原料,采用水蒸气活化法进行活性炭的制备。
2) pyrolysis carbon black
裂解炭黑
1.
Fundamental characteristics of pyrolysis carbon black made from waste tires and its application in styrene-butadiene rubber;
废轮胎裂解炭黑的基本性质及其在丁苯橡胶中的应用
2.
This paper mainly introduced the changement of pyrolysis carbon black surface properties from used tire through further processing.
本文主要介绍了废轮胎裂解炭黑经深加工处理后表面性能的变化。
3.
Using pyrolysis carbon black of used tire as primary material, modified superfine pyrolysis carbon black has successfully prepared through researching on the condition of superfine grinding and surface chemical modifying.
以废轮胎裂解炭黑为原料,经粉碎分级、表面改性等系统工艺条件,制备出性能优良的超细改性裂解炭黑。
3) pyrolysis residue
裂解残渣
4) thermals
[英]['θɜ:ml] [美]['θɝmḷ]
热裂解法炭黑
1.
Introduction in this paper involves physical and chemical properties of thermals and application and advantages in rubber products production.
介绍热裂解法炭黑的物理化学性能以及它对橡胶的作用和在橡胶制品中的应用情况。
5) Phenolic resin pyrolysis Carbon
酚醛树脂裂解炭
6) carbon residue
残炭
1.
Study on content changes of sulfur, nitrogen and carbon residue in process of residue fixed-bed hydrotreating;
渣油固定床加氢处理前后硫、氮和残炭质量分数变化研究
2.
The correlativity between four physical properties,including Δd(Difference of density)、lnν(Logarithm of kinematic viscosity)、w(CCR)(Mass fraction of carbon residue)and w(S)(Mass fraction of sulfur)and SARA mass fractions of atmospheric residue and vacuum residue was respectively discussed.
对常压和减压渣油的四组分质量分数(w(SARA))与密度差(Δd)、运动黏度对数(lnν)、残炭值(w(CCR))和硫质量分数(w(S))4个简单易测物性的相关性进行了考察。
3.
The kinetic viscosity 、carbon residue and the content of asphaltene of the heavy oil were investigated under function of ultrasonic wave.
讨论了超声波作用对重油的粘度、残炭和沥青质含量的影响。
补充资料：残炭
分子式：
分子量：
CAS号：
性质：用特定的仪器，将油品在不通空气的情况下加热至高温，此时，油品中的烃类即发生蒸发和分解反应，最终成为焦炭。此焦炭占试验用油的重量百分数，叫油品的残炭或残炭值。生成焦炭的主要物质是沥青、胶质及芳烃，在芳烃中又以稠环芳烃的残炭最高。所以残炭值在一定程度上反映了油品中沥青、胶质和稠 环芳烃的含量。在润滑油的质量标准中，常规定残炭的最大值。
分子量：
CAS号：
性质：用特定的仪器，将油品在不通空气的情况下加热至高温，此时，油品中的烃类即发生蒸发和分解反应，最终成为焦炭。此焦炭占试验用油的重量百分数，叫油品的残炭或残炭值。生成焦炭的主要物质是沥青、胶质及芳烃，在芳烃中又以稠环芳烃的残炭最高。所以残炭值在一定程度上反映了油品中沥青、胶质和稠 环芳烃的含量。在润滑油的质量标准中，常规定残炭的最大值。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条