1) fluorocarbon coating painting
氟碳漆涂装
2) F-C paint
氟碳漆
1.
The construction technology of reformation of ceramic facing tile with F-C paint;
用氟碳漆改造原瓷砖外墙面的施工技术
2.
By measuring property of F-C paint and Zn after hot and humidity test, after characteristic testing, it has been proved that: F-C paint and Zn has good compatibility, the resistance capability can be improved.
本文通过开展氟碳漆涂层和镀锌层湿热试验后性能测试研究,表明两者之间具有较好的相容性,可提高产品的防护性能。
3.
On the basis of structure and working procedure property,the F-C paint coating of normal temperature solidification has been proposed as an improvement method.
特种结构目前所采用的一些防护涂层在使用中易脱落或划伤,根据产品结构及工艺特点,提出了将常温固化型氟碳漆作为涂层改进方案。
3) fluorocarbon coating
氟碳漆
1.
As a new type of coating,fluorocarbon coating may be used in curtain wall decoration project.
氟碳漆作为一种新型涂料,可用作幕墙的装饰。
2.
By the real example of the library project of some university in Guangzhou, this passage gives a detailed explanation of the construction process and the technology of fluorocarbon coating used in the outer walls of buildings, and also points out the solving method of some technologic problems in the project.
本文通过广州某高校图书馆工程实例,详细说明了建筑外墙氟碳漆施工过程及其工艺,并对工程中的一些技术问题提出解决方案。
5) PVDF fluorocarbon paint
PVDF氟碳漆
6) fluorine carbon coating
氟碳涂料
1.
This text has briefly introdused the main variety of fluorine carbon coating on the market,and proposed some suggestions on the developing of fluorine carbon c oating.
我国氟碳涂料的发展十分迅速。
2.
The article reported the development situation of fluorine resin and fluorine carbon coating in domestic market,along with the current application of the main fluorine carbon coatings.
概述了我国氟树脂及氟碳涂料的发展情况,氟碳涂料中主要品种的应用状况。
补充资料：氟碳树脂漆
分子式：
CAS号：
性质：以氟碳树脂为成膜物质的涂料。氟碳树脂以牢固的C-F键为骨架，同其他树脂相比，其耐热性、耐化学品性、耐寒性、低温柔韧性、耐候性和电性能等均较好，且由于其结晶性好，故具有不黏附性、不湿润性。广泛应用于厨房和烹调用具，造型模具，机械滑动部分、食品、纺织、造纸等工业用机械的高级卷材涂料，各种罐类、输送管线、泵类、反应釜、换热器及精密器械等的涂装及衬里方面。由于氟碳树脂均系高熔点(180~380℃)，不溶于溶剂的固态树脂，故制成水或溶剂的分散型涂料，用喷涂、静电喷涂、幕式淋涂、辊涂等方式涂装，或作成粉末涂料，用静电喷涂或流化床浸涂法涂装。
CAS号：
性质：以氟碳树脂为成膜物质的涂料。氟碳树脂以牢固的C-F键为骨架，同其他树脂相比，其耐热性、耐化学品性、耐寒性、低温柔韧性、耐候性和电性能等均较好，且由于其结晶性好，故具有不黏附性、不湿润性。广泛应用于厨房和烹调用具，造型模具，机械滑动部分、食品、纺织、造纸等工业用机械的高级卷材涂料，各种罐类、输送管线、泵类、反应釜、换热器及精密器械等的涂装及衬里方面。由于氟碳树脂均系高熔点(180~380℃)，不溶于溶剂的固态树脂，故制成水或溶剂的分散型涂料，用喷涂、静电喷涂、幕式淋涂、辊涂等方式涂装，或作成粉末涂料，用静电喷涂或流化床浸涂法涂装。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条