1) Cu-ceria anode
CeO2基阳极
2) CeO2 base
CeO2基
3) CeO2/Au electrode
CeO2/Au电极
4) anode substrate
阳极基底
1.
Asymmetric anode substrate and rapid-raise temperature were the main factors of anode substrate warp and crack under molding pressure 25-250 MPa.
其中阳极基底、YSZ电解质薄膜和LSM阴极分别采用干压成型方法、浆料喷覆工艺和浆料涂覆法制备。
2.
LSGM+NiO anode substrates for intermediate temperature solid oxide fuel cells were fabricated and the relationships between porosity pore radii distribution, electrical conductivity of the substrate and its composition were studied.
２Ｏ３－δ（ＬＳＧＭ）的基础上，研制出中温固体氧化物燃料电池ＬＳＧＭ＋ＮｉＯ阳极基底；考察了阳极基底孔隙率、孔径分布及电导率随组成变化的规律；研究了阳极基底组成、微观结构、制备工艺等对负载型ＬＳＧＭ电解质薄膜成膜过程及质量的影响和负载型电解质薄膜在还原气氛中的结构稳定性；采用湿化学物理方法及等静压烧结工艺成功地制备出了厚度为２０～５０μｍ的负载型致密ＬＳＧＭ电解质薄膜。
3.
Preparation of anode substrate membranes, as the mechanical supports of SOFC PEN sandwich structure, is the most pivotal technique.
平板式阳极支撑型固体氧化物燃料电池 (SOFC)是现在SOFC研究领域的一个重要方向,作为 SOFC三明治结构力学支架的阳极基底膜的制备是实现该设计思路的最为关键的技术。
5) Al base sacrificial anodes
铝基阳极
6) anode substrates
阳极基底
1.
Different amount of pore-former was added into the anode substrates.
采用固相反应法制备阳极支撑型固体氧化物燃料电池的阳极基底,在阳极基底中加入不同含量的造孔剂。
2.
In order to avoid the cell deformation,the sintered temperatures of anode substrates were changed,shrinking rate of anode substrates matched with that of electrolyte,the optimal sintered temperature of anode was got.
采用固相反应法制备阳极支撑型固体氧化物燃料电池的阳极基底。
补充资料：银阳极泥提银(见铜阳极泥提金银)
银阳极泥提银(见铜阳极泥提金银)
extraction of silver from silver anode slime
y In yongJ，nl tlyln银阳极泥提银(extraetion of Silve:fr()nl 511一ver anode slime)见铜阳极泥提金银
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条