1) metal volume
金属量
1.
The reason of head leg wave occurrence was analyzed from the aspect of temperature,metal volume and the deformation of workpieces in rolling mills.
本文从温度、金属量、以及轧件在轧机里的变形三方面分析了头部腿浪产生的原因,提出了通过控制温度,修改孔型等控制措施。
2) trace metals
微量金属
1.
The effects of trace metals on the process of anaerobic digestion for straw were studied under the conditions of adding Co,Ni and the mixture of Co and Ni.
3种投加方式对厌氧消化系统的促进效果存在差异,其中投加Co+Ni混合微量金属是提高稻草厌氧消化效率和产气量的有效方法。
2.
The effect of supplying trace metals of Fe, Co, Ni on the performance of lab scale upflow Anaerobic Filter(AF) treating simulated coking plant wastewater was studied in this paper.
本文研究了投加微量金属元素对小试规模上流式厌氧滤池处理模拟焦化废水的影响。
3.
y experiments in the Zhujiang River estuary, the influences of suspended matter on the phases of trace metals Cu, Zn and Cd and their biological toxicity as well as the influences of humic acids on complex effects of trace metals Cu, Zn and Cd and their biological toxicity are studied.
通过实验，研究了珠江河口海区悬浮颗粒物质对微量金属Ｃｕ，Ｚｎ和Ｃｄ化学相态和生物毒性的影响，以及腐植酸对微量金属Ｃｕ，Ｚｎ和Ｃｄ络合作用和生物毒性的影响，从而回答一些目前仍有争议的问题。
3) trace metal
痕量金属
1.
The influence of wind-wave disturbance on colloidal trace metals in the waters of Taihu Lake.;
风浪扰动对太湖水体中胶体态痕量金属含量的影响
2.
The exchange adsorption mechanism effect of trace metal on syspended particles;
痕量金属在悬浮颗粒物上的吸附交换机理
3.
A summarization of the interaction of colloidal particles and trace metal in natural water;
天然水体中胶体粒子与痕量金属相互作用研究
4) areal productivity
面金属量
1.
Application of areal productivity to quantification of regional resources:A case study of East Tianshan Mountains;
区域资源定量评价中面金属量法的应用——以东天山为例
5) trace metals
痕量金属
1.
Development of flow injection-chemiluminescence method in determination of trace metals;
流动注射化学发光法测定痕量金属元素的进展
2.
The different supplement dosage of trace metals Fe,Co,Ni on the improvement of the anaerobic digestion of Solid Waste from farming trade market is studied.
在完全混合工艺条件下对农贸市场的固体废弃物进行厌氧消化,分析消化过程中pH值、VFA(挥发性脂肪酸)、COD(化学需氧量)和产气量等随时间的变化情况,研究不同投加量的痕量金属Fe、Co、Ni对农贸市场固体废弃物厌氧消化的促进作用。
3.
Based on correlation coefficients and principal component analysis, Fe and Al were selected as the concentration normalizer for the different trace metals.
由相关系数和主成份分析 ,选择铁和铝作为沉积物中痕量金属浓度的均一化元素 。
6) metal content
金属含量
1.
Effects of degumming methods on metal content in puer tea seed oil
脱胶方法对普洱茶籽油中金属含量的影响
2.
In activity improvement,the active components of spent equi- librium catalyst are impregnated and dried,which can increase catalyst micro-activity by 4-5 in addition to the reduction of heavy metal content and the improvement of stability.
废平衡催化剂活性改善技术对废平衡剂进行活性组分浸渍、干燥等处理后,可以使废平衡催化剂的微反活性提高4～5个单位,重金属含量也有所降低,并且具有很好的活性稳定性。
3.
The result shows that the high metal contents of the residuum andhigh temperature of the gasifier are the main reasons for slagging and block up in the gasifier.
结果表明，渣油中金属含量高及气化炉温度过高是气化炉结渣与堵塞的主要原因。
补充资料：面金属量
分子式：
CAS号：
性质： 在异常范围内，各异常点的元素剩余含量（测定含量减去背景值）的平均值与异常面积的每间积（以平方米百分率表示）。它是根据一个异常面积来估算矿化强度的参数，可用下式表达：MS=∑△S（Cx-C0）式中的MS为面金属量，△S为测网中点距与线距的乘积，单位为m2·100%或m2·10-6（m2·10-6）
CAS号：
性质： 在异常范围内，各异常点的元素剩余含量（测定含量减去背景值）的平均值与异常面积的每间积（以平方米百分率表示）。它是根据一个异常面积来估算矿化强度的参数，可用下式表达：MS=∑△S（Cx-C0）式中的MS为面金属量，△S为测网中点距与线距的乘积，单位为m2·100%或m2·10-6（m2·10-6）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条