1) reciprocating single screw pin-barrel extruder
往复式单螺杆销钉挤出机
1.
In the resent years,because of the unique kneading characters,more and more reciprocating single screw pin-barrel extruder were used in the polymer mixing process.
近年来,往复式单螺杆销钉挤出机以其独特的混炼性能越来越多地应用于聚合物混炼加工领域。
2) reciprocating pin-screw extruder
往复式销钉螺杆挤出机
1.
Especially the structural characteristics and application fields of co-rotating twin-screw extruder,reciprocating pin-screw extruder and series disc-screw extruder developed recently are introduced.
重点介绍了同向平行双螺杆挤出机、往复式销钉螺杆挤出机和串联式磨盘螺杆挤出机的结构特点、设计原理、混炼机理和应用领域。
2.
Based on the experiments,the extrusion system of a reciprocating pin-screw extruder is analyzed,the mixing principle is presented,the differences among the reciprocating pin screw extruders and single-screw extruders and twin-screw extruders are given.
结合研制实践 ,分析了往复式销钉螺杆挤出机挤压系统的特点 ,阐述了该类机型的混合机理 ,并与常规的单、双螺杆挤出机作了比
3) reciprocating pin screw extruder study
往复式销钉螺杆挤出机研究
4) Single-screw stroking kneader
单螺杆往复式混炼机
5) vented single-screw extruder
排气式单螺杆挤出机
6) single screw extruder
单螺杆挤出机
1.
Experimental Study on Melting Process in Vibration Induced Single Screw Extruder;
振动诱导单螺杆挤出机熔融过程实验研究
2.
Numerical simulation of three-dimensional flow in single screw extruder by finite volume method;
单螺杆挤出机中三维流动有限体积数值模拟
3.
Based on finite difference method of numerical simulation, the semi-analytical method is proposed in the paper, which is adapted to compute the residence time distribution(RTD) of polymer melt in a single screw extruder, then the RTD under different operation parameters are obtained to characterized the mixing of polymer melt in the course of processing.
基于有限差分数值模拟技术,提出了计算非牛顿流体在单螺杆挤出机内停留时间分布的半解析方法,得到了不同操作参数下的停留时间分布,该分布可用来表征聚合物熔体在加工过程中的混合情况。
补充资料：同轴往复式螺杆成型机
分子式：
CAS号：
性质：也称同轴往复式螺杆成型机。用螺杆使得成型材料塑化，同时螺杆也起柱塞作用的注塑成型机。可用于热塑性塑料、橡胶、泡沫塑料等各种材料的成型。由于螺杆旋转将塑化的材料积蓄在机筒头部，螺杆在积料的反压下向后退到一定的位置，同时继续将新加入的物料输送到螺杆头部。达到设定的预塑量后，螺杆停止后退，在注射油缸的作用下像柱塞一样前进，将熔融物料射出。除了保持螺杆塑化的优点外，与螺杆预塑化注塑机相比具有结构简单、成型材料滞留少、不易分解、更换材料容易等优点。
CAS号：
性质：也称同轴往复式螺杆成型机。用螺杆使得成型材料塑化，同时螺杆也起柱塞作用的注塑成型机。可用于热塑性塑料、橡胶、泡沫塑料等各种材料的成型。由于螺杆旋转将塑化的材料积蓄在机筒头部，螺杆在积料的反压下向后退到一定的位置，同时继续将新加入的物料输送到螺杆头部。达到设定的预塑量后，螺杆停止后退，在注射油缸的作用下像柱塞一样前进，将熔融物料射出。除了保持螺杆塑化的优点外，与螺杆预塑化注塑机相比具有结构简单、成型材料滞留少、不易分解、更换材料容易等优点。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条