2) molybdenum disilicide
二硅化钼
1.
Two important routes currently being used to improve molybdenum disilicide mechanical property and oxidation are the alloying approach and the doping approach.
介绍了二硅化钼合金化及掺杂改性的研究进展,对几种重要合金化元素和掺杂元素改性的二硅化钼材料进行了评述,并在此基础上提出了高性能二硅化钼材料研究开发的重点和方向。
2.
Applications of 2 different extrusion modes(equal channel angular extrusion and conventional forward extrusion) to the forming of molybdenum disilicide electric heating elements and their influence on the micro structure and density are studied.
本文研究将2种不同挤压方式(等径角挤压和传统正挤压)应用于二硅化钼电热元件的成型工艺,研究其对材料的微观组织及致密度的影响。
4) H4SiW6Mo6O40
硅钨钼酸
1.
A new environmentally friendly catalyst H4SiW6Mo6O40/Pan(Ⅳ) was prepared.
以H4SiW6Mo6O40(硅钨钼酸)/PAn(聚苯胺)为催化剂,通过丁酮和乙二醇反应合成了丁酮乙二醇缩酮。
2.
A new environmental friendly catalyst,H4SiW6Mo6O40/PAn was prepared and used for synthesizing n-butyraldehyde 1,2-propanediol acetal.
自制了硅钨钼酸(H4SiW6Mo6O40)/PAn(聚苯胺)催化剂。
3.
A new environmental friendly catalyst, H4SiW6Mo6O40/PAn was prepared.
通过环己酮和乙二醇为原料合成环己酮乙二醇缩酮,探讨了硅钨钼酸掺杂聚苯胺催化剂对缩酮反应的催化活性。
5) MoSi2
二硅化钼
1.
Self-propagating high temperature synthesis (SHS)is regarded as an effective technique for producing MoSi2 and MoSi2 based composites due to its low cost, quick reaction speed and high transformation rate.
自蔓延高温合成技术因具有低成本、反应速度快和转化率高等许多优点,成为制备二硅化钼基材料的有效方法。
2.
Various processes of the Mo/Si thin films deposited on Si (001) substrates by RF magnetron sputtering technique were carefully investigated and the MoSi2 thin film with the single tetragonal phase and low resistivity was successfully prepared.
用射频磁控溅射法在硅基底上成功制备出具有低电阻率的单一四方相二硅化钼薄膜,并通过X射线衍射仪、原子力显微镜及四探针电阻测试仪对退火前后的薄膜样品进行了结构和电学性能分析。
3.
The recent investigation development of MoSi2 including crystal structure,microstructure,properties and main application fields was reviewed.
金属间化合物二硅化钼由于具有较小的密度、较高的熔点,优异的抗氧化性,尤其是具有可贵的随温度上升强度并不下降的特性(R特性),使其得到广泛应用。
6) siliconmolybdate
钼硅酸盐
1.
Study on the Synthesis and Tribological Properties of Keggin Siliconmolybdate Nanoparticles Modified with Piperazine or Thiadiazole Derivatives Ag[Ⅰ];
哌嗪/噻二唑衍生物Ag[Ⅰ]修饰钼硅酸盐纳米颗粒的制备及摩擦性能
2.
The heteropoly siliconmolybdate nanoparticles modified with 2-octathio-5-mercapto-1,3,4-thiodiazole Ag(Ⅰ) were prepared in a solution of water-ethanol.
以合成的2-辛硫基-5-巯基-1,3,4-噻二唑为配体,在醇-水体系中制备了2-辛硫基-5-巯基-1,3,4-噻二唑Ag(Ⅰ)修饰的钼硅酸盐纳米颗粒,以透射电子显微镜(TEM)、扫描电子显微镜(SEM)、元素分析仪(EA)、傅立叶变换红外光谱仪(FT-IR)、热分析仪(TG-DTA)等测试手段对此纳米颗粒的形貌、组成和结构进行了表征,并在机械式四球长时抗磨损试验机上考察了其摩擦学性能。
补充资料：']十二钼酸(4-)]乙铵 C.I.蓝颜料1,硅钼酸盐
CAS：68413-81-0
分子式：C33H40N3·1/4Mo12O40Si
中文名称：N-[4-[[4-(二乙氨基)苯基][4-(乙氨基)-1-萘基]亚甲基]-2,5-环己二烯-1-亚基]N-乙基二十四氧合-[μ-12[原硅酸(4-)-O:O:O:O':O':O':O":O":O":O'":O'":O"']十二钼酸(4-)]乙铵 C.I.蓝颜料1,硅钼酸盐
英文名称：Ethanaminium, N-[4-[[4-(diethylamino)phenyl] [4-(ethylamino)-1-naphthalenyl]methylene]-2,5-cyclohexadien-1-ylidene]-N-ethyl-, [μ-12-[orthosilicato(4-)-O:O:O: O':O': O':O'': O'':O'': O''':O''':O''']]tetracosa-μ-oxododecamolybdate(4-) (4:1)
C.I. Pigment blue 1, Silicomolybdate
分子式：C33H40N3·1/4Mo12O40Si
中文名称：N-[4-[[4-(二乙氨基)苯基][4-(乙氨基)-1-萘基]亚甲基]-2,5-环己二烯-1-亚基]N-乙基二十四氧合-[μ-12[原硅酸(4-)-O:O:O:O':O':O':O":O":O":O'":O'":O"']十二钼酸(4-)]乙铵 C.I.蓝颜料1,硅钼酸盐
英文名称：Ethanaminium, N-[4-[[4-(diethylamino)phenyl] [4-(ethylamino)-1-naphthalenyl]methylene]-2,5-cyclohexadien-1-ylidene]-N-ethyl-, [μ-12-[orthosilicato(4-)-O:O:O: O':O': O':O'': O'':O'': O''':O''':O''']]tetracosa-μ-oxododecamolybdate(4-) (4:1)
C.I. Pigment blue 1, Silicomolybdate
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条