2) slab withdrawing
拉坯
1.
The present paper introduces the schedules of the temperature, slab withdrawing andcooling, feeding rare earth cored wire into mold and the selection of mold casting powder, etc.
介绍了攀钢连铸X52管线钢所采用的温度制度、拉坯制度和冷却制度、结晶器喂稀土丝以及结晶器保护渣选择等工艺。
3) dynamic tension
动态拉伸
1.
Experimental studies on dynamic tension of metal ring by electromagnetic loading;
实现金属环动态拉伸的电磁加载技术研究
2.
The mechanisms of crack forming and propagation were investigated during dynamic tension under static load by SEM.
采用熔铸法制备的原位自生TiC/Ti复合材料,在SEM中静载动态拉伸,原位观察和研究了裂纹的萌生及扩展机制。
3.
The dynamic tensile properties of tungsten fibers(80%,volume fraction) reinforced Zr based amorphous alloy matrix composite was investigated by means of the Split Hopkinson Pressure Bar(SHPB),and Scanning Election Microscope(SEM) was used to evaluate the fracture mode of the composite under dynamic tension.
采用霍普金森杆拉伸技术研究了W丝体积分数为80%的W丝/Zr基非晶合金复合材料的动态拉伸性能,通过扫描电镜研究了该复合材料动态拉伸断裂模式。
4) dynamic tensile
动态拉伸
1.
In situ SEM study of dynamic tensile in wrought magnesium alloy AZ31B rolling sheet
AZ31B镁合金轧制板材室温动态拉伸的SEM观察
2.
The dynamic tensile test was carried out on both DP and TRIP steel samples with strain rates in the range of 10~2～10~3 s~(-1).
采用气动式间接杆杆型冲击拉伸试验装置对TRIP钢和DP钢在102~103s-1应变率范围的动态拉伸变形行为进行了研究。
3.
By using the equipment of dynamic tensile and SEM, the microstructures of two kinds of high nitrogen austenitic stainless steels are observed.
利用动态拉伸台和SEM对两种高氮奥氏体不锈钢进行了动态拉伸的微观形貌原位观察 实验表明滑移和孪生在高氮奥氏体中同时存在;随着形变量的增加,晶粒内部的滑移线加宽,逐步成为微裂纹;而晶界的结合力较强,没有观察到沿晶断裂;氮的加入会产生固溶强化和间隙强化,增大点阵滑移的阻力,从而降低奥氏体不锈钢的塑性 随着氮含量的增加,试样的延伸率降
5) dynamic split
动态劈拉
补充资料：实坯坯
1.见"实丕丕"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条