1) Fluorosilicone rubber
共聚氟硅胶
1.
Fluorosilicone rubber exhibites excellent heat and cold resistance,solvent and oil resistance etc,and applied in some important fields like astronavigation,automobile, electron and so on.
本文采用1,3,5-三(三氟丙基)-1,3,5-三甲基环三硅氧烷(FD_3)/六甲基环三硅氧烷(D_3)开环共聚制备不同组成的共聚氟硅胶,对阴离子本体开环共聚的环链平衡和共聚物分子量控制进行了较为深入的研究,优化了反应条件,为合成高转化率、高分子量共聚氟硅胶提供了基础。
2) copolymer
共聚
1.
Preparation and application of the silicone-polyurethane copolymer;
有机硅/聚氨酯共聚物的制备研究与应用
2.
Synthesis of itaconic acid-sodium acrysulfonate copolymer;
衣康酸—丙烯磺酸钠共聚物的合成
3.
Polymerization and Production of Vinyl Chloride Copolymer;
氯乙烯共聚物的聚合及制备
3) copolymerization
共聚
1.
Study on the curing process of benzoxazine-epoxy copolymerization;
苯并口恶嗪/环氧树脂共聚固化过程研究
2.
Study on controlled procession of AN/MA free radical copolymerization;
AN/MA自由基共聚合可控过程研究
3.
Application of initiators in vinyl chloride copolymerization;
引发剂在氯乙烯共聚中的应用
4) Copolymers
共聚
1.
Copolymers both in dilute solution and in film exhibited efficient intra-and/or inter-molecule energy transfer,and the quantum efficiencies of copolymers were enhanced o.
通过3-氨基-4-羟基苯甲酸盐酸盐(AHBAH),2,5-二氨基-1,4-苯硫醇盐酸盐(DABDT)和2,5-噻吩二羧酸(TDA)在多聚磷酸中缩聚,合成了一系列不同组成的高、低带隙无规共聚物聚(2,5-苯并噁唑)-co-聚(2,5-噻吩基苯并二噻唑)(ABPBO-co-PBZTT),并制备了一系列由ABPBO和PBZTT组成的共混物。
2.
The properties of these copolymers and their applications are also described.
介绍了二氧化碳合成脂肪族聚碳酸酯 (APC)的合成工艺、催化剂体系、物理化学性能以及改性 ,并阐述了共聚物性质和应用前
3.
Copolymers of dl 3 methyl glycolide and ε caprolactone have not been found yet in the open literature.
报道了dl3甲基乙交酯和ε己内酯共聚物的合成和表征的研究结果。
5) polymerization
共聚
6) co-polymerization
共聚
1.
Then PLGA copolymers were obtained by co-polymerization of the two monomers.
论文对乙交酯、丙交酯的合成进行了详细研究,获得了高纯度的单体;在此基础上通过二单体的共聚得到聚乙丙交酯(PLGA),探讨了共聚条件对最终产物结构及性能的调控机理,为PLGA的实用化奠定初步基础。
参考词条
补充资料:偏氟乙烯-六氟异丁烯共聚物
分子式:
CAS号:
性质:是偏氟乙烯和六氟异丁烯摩尔1:1共聚物。长期使用温度280~288℃,是氟塑料中最高的,也是高温机械强度最好的品种。在室温下的拉伸强度为37.9MPa,在200℃时仍有20.7MPa,热变形温度高(220℃)、耐磨耗、耐蠕变性好。可以用通常的模压、注塑、涂覆等方法加工,用于制造特种电器零件和金属涂覆。
CAS号:
性质:是偏氟乙烯和六氟异丁烯摩尔1:1共聚物。长期使用温度280~288℃,是氟塑料中最高的,也是高温机械强度最好的品种。在室温下的拉伸强度为37.9MPa,在200℃时仍有20.7MPa,热变形温度高(220℃)、耐磨耗、耐蠕变性好。可以用通常的模压、注塑、涂覆等方法加工,用于制造特种电器零件和金属涂覆。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。