1) rubber bearing testing machine
橡胶支座试验机
2) rubber support
橡胶支座
1.
Analysis of doule-direction earthquake rubber support base earthquaking process;
双向水平地震下橡胶支座基础隔震的时程分析
2.
Started from problems in summarizing bridge surface shrinking cracks,it analyzes and elaborates the key skilled problems of multi-hole bridge such as top force analysis,bottem structural block and soft supporting s combination as well as kinds of rubber supporting and rational usage.
从总结桥面伸缩缝的各种问题出发,对多孔连续梁桥上部的受力分析、下部构造墩台和柔性支座的结合使用、各种形式橡胶支座的合理使用等多孔连续梁桥的技术关键问题进行了分析阐述,并提出了改进伸缩缝构造的一些建议,从而为改善伸缩缝问题提出了一些新思路。
3) rubber bearing
橡胶支座
1.
Effective factors on properties of laminated rubber bearing;
叠层隔震橡胶支座性能的影响因素
2.
Key points for installation quality control of bridge rubber bearings;
浅谈桥梁橡胶支座安装质量控制的要点
3.
Application of shock insulation technique of laminated rubber bearing;
加层橡胶支座隔震技术的应用
4) rubber bearings
橡胶支座
1.
The experiments show that the hysteresis property of lead plug rubber bearings(LRB) is closely related to load time,which is not considered in the existing mechanics model of LRB.
大量的试验数据表明,铅芯橡胶支座的滞回曲线与加载时程密切相关。
2.
In order to grasp the tension properties of rubber bearings,and to establish the mechanics model and value criterion,the new computation models of bi-stiffness stress-strain and origin tension stiffness stress-strain are proposed,based on tension stress-strain curve of rubber bearings,and the hysteretic model is put forward too for analyzing the tensile properties.
方法基于橡胶支座拉伸应力应变关系曲线,提出了双刚度与原点拉伸刚度应力应变两个计算模型,分析了橡胶支座弹塑性拉伸性能的恢复力模型。
5) SMA-rubber bearing
SMA-橡胶支座
1.
Experimental study on mechanical behavior of SMA-rubber bearing;
SMA-橡胶支座的力学性能试验研究
2.
The SMA-rubber bearing with hysteretic damping is initially developed by incorporating SMA wires and laminated rubber pad.
在原SMA-橡胶支座(I型)的基础上,在支座中增加弹簧改善SMA耗能拉索的功能,设计了II型SMA-橡胶支座,建立了支座的理论模型。
3.
The dynamic analysis of seismically isolated single-layer spherical lattice shell structures by a new type of SMA-rubber bearing is performed systematically.
对新型SMA-橡胶支座隔震单层球面网壳结构进行了系统的动力分析。
6) rubber-metal mounting engine
橡胶-金属发动机支座
补充资料:橡胶模具、橡胶压模、橡胶硫化模
分子式:
CAS号:
性质:又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得,并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同,型腔尺寸必须考虑不同橡胶的收缩率,在产品尺寸基础上进行放大或缩小,方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。
CAS号:
性质:又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得,并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同,型腔尺寸必须考虑不同橡胶的收缩率,在产品尺寸基础上进行放大或缩小,方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条