1)  simulation calculation
单因素分析法
1.
According to the characteristics of the NJ6400GHA3(lnique),a 3D 7 degree-of-freedom vehicle vibration model that can reflect vibration of automobile all-sidedly is established and a corresponding simulation calculation procedure .
同时采用单因素分析法,分别改变前、后悬架的刚度和阻尼,利用所设计的程序进行运算分析,得到前、后悬架参数的优化值,并将所有优化后的参数值代入计算程序运算后得出的结果与优化前的模拟计算结果比较,发现优化后效果较好。
2)  single factor
单因素
1.
Single factor analysis and multifactor comprehensive mapping method——reconstruction of quantitative lithofacies palaeogeography;
单因素分析多因素综合作图法——定量岩相古地理重建
2.
Through single factor experiment the investigation analyzed the influence of factors such as pH, temperature, preincubatioin and oil concentration on the production of conjugated linoleic acid.
通过单因素实验分析了发酵过程中pH、温度、预培养和苜蓿籽油的浓度对生产共轭亚油酸的影响。
3.
Methods:On the basis of single factor,the paper does experiments by researching factors which have important influence and include the best purificition method of mulberry leaf's flavonoid composition.
方法:通过单因素实验筛选最佳大孔树脂,并对纯化有显著影响的因素进行正交实验,获得最佳纯化方案。
3)  single factor analysis method
单因素
1.
During the extracting process, three main factors including ratio of solid to liquid, exacting time and temperature were studied by using single factor analysis method.
在提取过程中,通过单因素法分析了三个主要因素:料液比、浸提温度及提取时间对提取率的影响。
2.
During the extracting process, three main factors including ratio of solid to liquid,ultrasound power and ultrasound extracting time were studied by using single factor analysis method.
在提取过程中,通过单因素法分析了几个主要因素:料液质量比、超声波提取功率及超声波提取时间对提取率的影响。
3.
During the extracting process,four main factors,namely solid:liquid ratio,immersing time,extraction temperature and extraction time were studied by using single factor analysis method.
在提取过程中,通过单因素法分析了几个主要因素:料液质量比、提取温度、浸泡时间及提取温度对提取率的影响。
4)  single gene judgement
单因评判
1.
Based on single gene judgement,expansive characteristic of Zaoyang expansive soil is analyzed by the numbers by the integrated blurry judgement.
在总结单因评判方法的基础上,利用综合模糊评判方法,对枣阳膨胀土的膨胀特性进行了系统分析,得出了枣阳地区膨胀土的膨胀等级分类,为膨胀土工程提供了可靠数据。
5)  single-factor
单因素
1.
This paper introduce the content of pricing decision briefly,and emphasize single-factor and multi-factors,and expound the mechanism as well as its application trait of the models respectively,supplys reference to the further research of quote decision.
简要介绍了报价决策的基本内容,重点论述了单因素与多因素报价模型及其分类,并分别阐述了其模型的建模机理与应用特点,为进一步研究报价决策问题提供了参考依据。
2.
Considering the deficieney of the pracrical use of traditional forecasting me thod of single-factor time series,a grey forecasting method model for a mudti-factor time series is established by using DGM(1,1)model hased on the principle of multi-element linear regression to sgnthesige the various factors.
对于传统的单因素时间序列预测法在实际应用中的不足之处,提出采用灰色DGM(1,1)模型和多元线性回归原理相结合的方法,综合各种因素建立多因素时间序列的灰色预测模型。
3.
In this paper,fly ash was applied to remove the fluoride of wastewater and every single-factor experiment was done,which influenced the removal ratio of fluoride.
为处理含氟废水,本实验采用粉煤灰作为吸附材料,并进行了影响粉煤灰处理含氟废水的各种单因素条件下的实验。
6)  lost sale factor
丢单因子
1.
This paper presents an exponential time-varying demand production-inventory mode for deteriorating items with variable lost sale factor and backlogging rates relative to the inventory level and production stages during shortage period.
库存系统主要参数的灵敏度分析表明,需求增长因子和丢单因子对计划期内库存系统总成本影响较小,而服务水平和变质系数对计划期内库存系统总成本影响较大,在进行生产型企业库存控制决策时必须考虑这些因素。
参考词条
补充资料:因素分析法
确定各因素影响程度的一种分析法。一个经济指标往往是由多种因素造成的。它们各自对某一个经济指标都有不同程度的影响,只有将这一综合性的指标分解成各个构成因素,才能从数量上把握每一个因素的影响程度,给工作指明方向。因素分析法有不同的计算方式,常见的有连锁替代法。这一方法是利用各个因素的实际数与标准数的连续替代来计算各因素脱离标准所造成的影响。例如,某一个财务指标及有关因素的关系由如下式子构成:实际指标:Po=%26times;Bo%26times;Co;标准指标:Ps=As%26times;Bs%26times;Cs;实际与标准的总差异为Po-Ps,PG这一总差异同时受到A、B、C三个因素的影响,它们各自的影响程度可分别由以下式子计算求得:

  A因素变动的影响:(Ao-As)%26times;Bs%26times;Cs;
  B因素变动的影响;Ao%26times;(Bo-Bs)%26times;Cs;
  C因素变动的影响:Ao%26times;Bo%26times;(Co-Cs)。

  最后,可以将以上三大因素各自的影响数相加就应该等于总差异Po-Ps。

  利用因素分析法,一方面可以全面分析各个因素对某一个经济指标的影响,也可以单独寻求某一个因素对该经济指标的影响。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。