1) the figuration of corona electrode
电晕极形状
2) electrode shape
电极形状
1.
Optimization of the electrode shape of AlGaInP LED;
AlGaInP LED电极形状的优化
2.
An electron gun code is used to simulate the electron trajectory, the influence of electrode shape, magnet field, electron trajectory on the electron beam have been studied.
利用电子枪模拟程序对电子轨迹进行模拟计算,研究了电极形状、磁场分布以及电子轨迹与电子注参量的影响,为磁控注入电子枪的设计提供了理论依据。
3.
After that,we simulated the light extraction efficiency of the general production chip,optimized the opaque electrode shapes at the guidance of this and optimized the width of the electrode further.
在此基础上进一步对普通生产芯片进行模拟分析,得知其光提取效率最高区主要分布在芯片的四个直角区域,并以此为指导进行不透明电极形状的优化,进而对其条形电极的宽度进行优化,可使所获得的出光效率比传统圆形电极提高了62。
3) electrode shapes
电极形状
1.
The electrode shapes, electron trajectory and electron beam parameters are also given with the computer adided design.
编制了一套大型的计算程序，利用计算机模拟，设计出了电极形状、电子轨迹与电子注参量。
4) corona electrode
电晕电极
5) corona poling
电晕极化
1.
Optimum corona poling temperatures of these polymeric films were found lower than glass transition temperatures of the materials and the second order nonlinear susceptibility χ (2) of CNDA/PMMA is improved compared with that of NDA/PMMA.
实验中发现两种掺杂极化聚合膜的最佳电晕极化温度均低于它们的玻转温度，ＣＮＤＡ／ＰＭ－ＭＡ极化掺杂聚合膜的χ（２）较ＮＤＡ／ＰＭＭＡ极化聚合膜的大。
2.
Two different poling techniques—corona poling and contact poling in the backdrop of electro-optic (EO) polymer modulators are compared.
对调制器用电光聚合物材料的2种极化工艺———直接接触极化方法和电晕极化方法进行实验比较和分析,制备了用于极化实验的3层结构的电光聚合物调制器,给出了这2种极化方法的实验装置和极化工艺。
3.
After corona poling of the film at 185° for 4 hours, about 1/5 of DO3 molecules remained in solid state film, estimating from their spectra, and the.
经高温电晕极化后 ,用二次谐波发生装置 ,测量出薄膜材料的二次谐波强度 ,并计算出经极化后薄膜材料的 p→p的二阶有效极化系数deff=0 11pm/V。
6) corona electrode
电晕极
1.
The proper position of corona electrodes in electro-cyclone is discussed.
通过对特定的旋风子进行实验,对静电旋风分离器中电晕极合理结构进行了探讨,实验结果表明:电晕极根数太多会引起“电晕屏蔽”,电晕极为8根时较16根时分离效率略高;电晕极靠近外筒壁尽管会导致下行流区切向速度有所降低,但此时更有利于电场力对微细粉尘的分离,总的效果使静电旋风分离器的分离效率有所提高。
2.
The function of corona electrodes regulated temperature and the major structure of the electrostatic precipitator (ESP) with corona electrodes regulated temperature are introduced.
介绍了复合式电晕极的性能和复合式电晕极除尘器的主体结构，测试了复合式电晕极除尘器模拟运行的有关参数。
补充资料：“质子-电子偶极-偶极”质子弛豫增强
“质子-电子偶极-偶极”质子弛豫增强
物理学术语。原子核外层中不成对的电子质量小，但磁动性很强，可使局部磁场波动增强，促使氢质子弛豫加快，从而使T1和T2缩短，这种效应即为PEDDPRE。过渡元素和镧系元素大部分在d和f轨道有多个不成对电子，所以其离子往往具有PEDDPRE，可用来作顺磁性对比剂，如钆(Gd)。Gd在外层有7个不成对电子，具有很强的顺磁性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条