1) trenching quality
成槽质量
2) quality of notch grains
槽纹质量
3) quality of notch
切槽质量
1.
Analysis of the basic causes related with the quality of notch in the laser trimming system;
激光调阻中切槽质量与影响因素的关联定位分析
4) quality of resultant yarn
成纱质量
1.
Through the production trial,analysis is done to the application of the domestic spinning draft parts of V shape,pneumatic pressurizing,cots with low rigidity and hi-elasticity,new top and bottom aprons and mid-rollers on the drafting system of the spinning frame in relation to quality of resultant yarn.
通过生产试验,分析了细纱机牵伸系统采用国产新型V型牵伸、气动加压、低硬度高弹性胶辊、新型上销、下销、中胶辊等纺纱器材和合理工艺配置对成纱质量的影响,并重点对V型牵伸后区倍数、罗拉隔距、气动摇架压力大小和前胶辊的前冲量进行研究,探讨了提高成纱质量的有效途径。
2.
Exploration is done to the relationship of cot structure,cot rigidity to evenness of the resultant yarn and yarn strength;relationship of cot rigidity to friction factor and linear width of nipper jaws;relationship of cot diameter and telescoping tolerance to quality of resultant yarn.
阐述了胶辊结构、硬度与成纱条干、强力的关系,胶辊硬度与摩擦因数、钳口线宽度的关系;胶辊直径、套差与成纱质量的关系;分析了低硬度胶辊改善成纱条干的机理,指出胶辊制作中必须注意的问题及纺纱工艺配置。
3.
Details introduction is done to how to do process configuration and aborative management for upgrading quality of resultant yarn with big draft process.
通过在纺纱实践中对V型牵伸、上销架、专利下销、中胶辊、铝衬管胶辊、节能锭带、带压力棒隔距块和压力棒上销的应用对比,详细分析了如何优化工艺配置和进行精细化管理,为提高细纱大牵伸成纱质量创造了必要的条件。
5) molding quality
成型质量
1.
Rough Set Analysis of Effect of Processing Parameter on Injection Molding Quality;
工艺参数对注塑成型质量影响的粗糙集分析
2.
Pre-analysis of part molding quality was finished to improve quality and efficiency of injection mold design.
应用MPI模流分析软件对摩托车尾灯罩注射模进行了流动填充模拟分析,得出了制品成型后在气穴、熔接痕、翘曲和欠注等方面的情况,对制品的成型质量做出了预分析,以提高模具设计的质量和效率。
3.
This paper presents a method using ActiveX technology to investigate the influence of the partial constructive dimensions and gate location of an injection molded part on the molding quality.
提出一种运用ActiveX编程技术来分析注塑产品的局部结构尺寸和浇口位置对注塑成型质量影响的方法。
6) Forming quality
成形质量
1.
The forming quality and controlling parameters of spinning products;
旋压件的成形质量及其控制参数
2.
According to the technology of rapid manufacturing ceramic parts by plasma spray forming, the temperature field distribution of the plasma jet, the method of feeding powder, the energy and momentum transfer between the particle and plasma jet during spraying, and the influence of temperature and velocity property of the particle on forming quality are studied in detail.
从等离子熔射快速制造陶瓷件工艺过程入手,研究等离子射流温度场分布、送粉方式、粉末飞行过程中射流与粉末能量和动量传递、粉末的温度特性和速度特性对成形质量的影响;分析沉积过程中所收集粉末的熔融状态、粒子扁平化形态对熔射层微观结构的影响,研究表明,通过优化工艺参数,改善射流温度场分布、粉末飞行特性,可有效地提高成形质量。
3.
The experimental results have indicated that the air pressure has direct influence on the atomization,in-flight temperature,speed,forming quality of the droplets.
实验结果分析表明,雾化气体压力直接影响熔滴的雾化状态,熔滴飞行温度、速度,以及成形质量。
补充资料：槽化成
分子式：
CAS号：
性质：极板在未组装成蓄电池之前，先在化成槽中进行的化成。经化成的极板组装后即成蓄电池。干式荷电和干式非荷电蓄电池生产均采用槽化成工艺。
CAS号：
性质：极板在未组装成蓄电池之前，先在化成槽中进行的化成。经化成的极板组装后即成蓄电池。干式荷电和干式非荷电蓄电池生产均采用槽化成工艺。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条