1) Second-order Curvature Compensation
二阶曲率补偿
2) high-order curvature compensation
高阶曲率补偿
1.
A bandgap voltage reference with high-order curvature compensation;
一种高阶曲率补偿的带隙电压基准
2.
The circuit realizes high-order curvature compensation by adding a new branch to the traditional bandgap reference.
为获得一个稳定而精确的基准电压,提出了一种适用于低电源电压下高阶曲率补偿的电流模式带隙基准源电路。
3) second degree curvature compensation
二次曲率补偿
1.
Based on the principle of second degree curvature compensation,a novel bandgap reference circuit compensated by second degree curvature with high accuracy is proposed in this paper.
基于二次曲率补偿的基本原理,提出一种高精度的采用二次曲率补偿的新型带隙基准源电路,产生二次温度补偿量对传统的带隙基准源进行校正,获得更小的温度系数。
4) second-order compensation
二阶补偿
1.
The circuit is developed based on the conventional bandgap reference,and achieved second-order compensation using a temperature dependent resistor ratio generated by the different kinds of resistors.
电路在传统带隙基准源的基础上进行改进,利用不同材料电阻温漂系数的比值实现二阶补偿。
5) curvature compensation
曲率补偿
1.
Low voltage bandgap reference design with closed loop curvature compensation
闭环曲率补偿的低电源电压带隙基准源的设计
2.
Comparing to the typical temperature compensation, the third branch current can be added to optimize the temperature features by curvature compensation.
在传统的电流温度补偿的基础上,通过增加一条分支电流对温度特性进行曲率补偿(二阶温度补偿),并且详细地分析了补偿原理。
3.
Using high-order curvature compensation technique,the temperature performance of the voltage reference has been enhanced by offsetting the negative temperature dependence of the logarithmic term in Vbe(T) with a positive term.
介绍了一种带隙基准参考电路结构,采用二阶曲率补偿技术,通过增加一正温度系数项补偿电路中Vbe(T)展开的负温度系数对数项,改善了基准参考电压源的温度稳定性。
补充资料：二氧化双环戊二烯B阶树脂模塑料
分子式：
CAS号：
性质：又称二氧化双环戊二烯B阶树脂模塑料。以二氧化双环戊二烯B阶树脂为基料配制的能采用模塑方法成型的配混料。产品性能为：弯曲强度110MPa，冲击强度5.4kJ/m2；马丁耐热240℃；体积电阻率1.3×1016Ω·cm，介电强度24.5MV/m。由二氧化双环戊二烯B阶树脂，用石英粉等作填料，再加脱模剂配混制得。可用模塑法制成耐热、耐候制品用于军工和民用方面。
CAS号：
性质：又称二氧化双环戊二烯B阶树脂模塑料。以二氧化双环戊二烯B阶树脂为基料配制的能采用模塑方法成型的配混料。产品性能为：弯曲强度110MPa，冲击强度5.4kJ/m2；马丁耐热240℃；体积电阻率1.3×1016Ω·cm，介电强度24.5MV/m。由二氧化双环戊二烯B阶树脂，用石英粉等作填料，再加脱模剂配混制得。可用模塑法制成耐热、耐候制品用于军工和民用方面。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条