1) incubation effect
潜伏作用
1.
This research examined the incubation effect and it s mechanism through two experiments which used a geometric insight problem called the farm problem and made undergraduate students or postgraduates serve as subjects.
本研究以大学生和研究生为被试，采用一个几何顿悟问题——农场问题，通过两个实验对潜伏作用及其机制进行了实验验证。
2) Latent
潜伏
1.
Evaluation of Application Value on TRUST for Diagnosing Latent Syphilis;
甲苯胺红不加热血清试验在潜伏梅毒诊断中的应用价值评价
3) Latency
潜伏
1.
Objective To investigate whether there is latency of herpes simplex virus 1 (HSV-1) in the ciliary body of normal human eyes.
目的 研究正常人睫状体是否有单纯疱疹病毒Ⅰ型潜伏。
2.
This paper discusses the meaning and characteristics of culture in straitened circumstances and two types of culture in straitened circumstances,and points out the domino effect of return and latency of poor living by culture lag.
论述了贫困文化的内涵、特征以及贫困文化的两种存在形式 ,分析了贫困文化滞后消亡所产生的贫困回归与贫困潜伏效应 ,指出必须充分认识文化扶贫的战略意义 ,从深度、广度、效度三个方面来进一步推进文化扶贫工作。
3.
The former research had discovered HSV-1 mainly latency in some ganglia such as trigeminal ganglion and cervix sympathetic ganglion.
背景与目的:眼部主要是单纯疱疹病毒Ⅰ型(Herpes simplex virus,HSV-1)感染,以往的研究发现HSV-1 病毒主要潜伏在三叉神经节、颈交感神经节等部位,后来在鼠的虹膜、睫状体、颈上神经节、人的角膜、杏仁体、海马、脑干等部位发现HSV-1,近年来在睫状神经节、翳状胬肉也发现了HSV-1。
4) submarine gate
潜伏浇口
1.
the optimization position for submarine gate and cool canal as well as the characteristic of mold quality are fast obained.
0模块对电源插座板上盖进行了充分的工艺仿真分析,快速得到了潜伏浇口和冷却水道的最优开设位置以及模具的质量属性,从而优化模具设计流程、提高设计效率和减少设计过程中的错误。
2.
A particular injection mould with submarine gate and two-stage pushing out plastics by cavity plate and ejector pin for thin disk is designed.
设计了一种特殊的潜伏浇口型腔板-推杆二级推件薄圆盘注塑模,论述了模具结构特点和工作原理。
3.
An injection mould for the pipe joint was designed and the key points in the design of the submarine gate and the core asˉsembly were elaborated.
分析了内螺纹衬塑直角管接头在给水管道中的应用特点,分析了其成型工艺性,设计了1副内螺纹衬塑直角管接头注射模,其中特别探讨了潜伏浇口及组合型芯的设计要点,保证了脱模及抽芯的可靠性,最终实现了产品的成型。
5) potential pollution
潜伏污染
1.
Some methods were proposed to prevent the potential pollution.
论述我国历史上最早的环境污染见证、我国现代环境污染现状与损失,重点探讨潜伏污染并提出预防的建议。
6) incubation period
潜伏期
1.
Calculation for the Incubation Period of SARS and Follow-up Study on the Infectiousness of the Convalescent SARS Patients;
SARS潜伏期计算方法和恢复期传染性的研究
2.
The effects of NORPIN-A on incubation period for cough ,on frequencies of cough ,and on the output of pheonl red were observed.
方法 :分别用小鼠吸入浓氨水引发咳嗽 ,小鼠腹腔注射酚红建立动物实验模型 ,观察NORPIN -A对小鼠咳嗽潜伏期及咳嗽次数的影响及对小鼠酚红排出量的影响。
3.
In this paper,we divide the crowd in the infected area into five kinds and apply dynamics method to build a model of infectious disease of "hand,foot and mouth disease(HFMD)" type containing incubation period and having contagion equally within incubation period,morbidity scheduled time and the scheduled time recovering.
将传染病流行区内的人群分成5类,根据人群之间的变化机制,应用动力学方法建立了含有潜伏期且在潜伏期、发病期和病愈期内均具有传染性的手足口病型传染病的数学模型。
参考词条
补充资料：胞饮作用和胞吞作用
胞饮作用和胞吞作用
pinocy tosis and endocytosis
吸收膜外吸附的溶液或物质.例如大分子或分子的聚集体(moleeular aggregates)，如图所示。一般胞饮作用是指以这种方式吸收液体徽滴的过程，胞吞作用是指吸收大分子或分子聚集体的过程，但有时也用胞饮作用或胞吞作用泛指通过质膜内陷吸收膜外所吸附的物质的过程。通常这种过程在矿质养分吸附中的作用不大，但胞饮作用或胞吞作用为大分子的吸收提供了一种可能的机理。(饶立华)胞饮作用和胞吞作用(pinocy‘0515 and“n-docytosis)细胞外的液体徽滴或物质吸附在质腆上，通过质膜内陷形成小囊泡而被消化吸收的过程。电镜观察的资料证明植物根可以通过质膜内陷的方式 脆饮作用及胞吞作用示意图(a)质膜外吸附大分子及液滴，(b)质膜在吸附大分子及液滴的部位内陷.(c)质膜内陷部位形成的小t泡进入细胞质，(d)小续泡 膜溶解。其内含物转移到细胞质中
说明：补充资料仅用于学习参考，请勿用于其它任何用途。