说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 槛值
1)  the threshold
槛值
2)  threshold [英]['θreʃhəʊld]  [美]['θrɛʃhold]
门槛值
1.
An Investigation on the Relation between the Fatigue Crack Propagation Threshold and Grain Size The Application of the Dislocation Theory;
疲劳裂纹扩展门槛值与晶粒尺寸关系的研究—位错理论的应用
2.
In contrast with the threshold of fatigue cracks,a series of regulation of expanding of fatigue small cracks has been deduced.
采用对比分析方法,从疲劳裂纹的门槛值角度出发,归纳总结了疲劳裂纹的扩展规律。
3.
Near-threshold fatigue crack propagation tests were conducted under combined torsion and tension on a circumferentially pre-cracked round bar of an austenite stainless steel.
研究了带环状预裂纹的奥氏体不锈钢圆棒试样在循环扭转/拉伸复合载荷下,门槛值附近的疲劳裂纹扩展行为,分析了复合加载时不同载荷比对裂纹扩展的影响,对裂纹扩展的初始阶段进行了详细研究,用应力强度因子表征了裂纹扩展开始的门槛值,提出了椭圆方程表达的疲劳裂纹扩展开始的门槛值模型,该方程可在裂纹尖端位移准则的基础上导出,疲劳裂纹扩展停止的门槛值条件也可用椭圆方程表达。
3)  threshold value
门槛值
1.
Influence of stress ratio R on threshold value △K_(th) of fatigue crack propagation for welded joints of 09CuPCrNi steel;
应力比R对09CuPCrNi钢焊接接头疲劳裂纹扩展门槛值△K_(th)的影响
2.
The results show that the threshold value △Kth of steel with 1.
8%Si钢的门槛值△Kth较 0。
3.
A new method of determinning the threshold value △Kth on a new typeAMSLER fatigue test system by computer control is given.
阐述了用新型AMSLER高频疲劳试验机,结合计算机控制测定材料门槛值△Kth的新方法。
4)  lower threshold value
下门槛值
5)  fracture threshold value
门槛值
1.
Based on the fracture test standard,fracture roughnessKIC,fracture threshold value Kth and crack growth rate da/dN at three different stress ratio are determined for a metallic material on the root of helicopter rotor blade.
根据断裂性能测试标准,分别测试了直升机桨叶根部材料断裂韧性K1c,3个应力比下的裂纹扩展门槛值△Kth和裂纹扩展速率da/dN;再利用多元线性回归法对试验数据进行了曲线拟合,分别得到了断裂等寿命曲线和四参数全范围da/dN曲线公式。
2.
Based on the fracture test standard,fracture roughness K_(IC),fracture threshold value ΔK_(th) and crack growth rate da/dN at three different stress ratio are determined.
根据断裂性能测试标准,分别实验测试了直升机桨叶根部材料断裂韧性K1C,3个应力比下的裂纹扩展门槛值ΔKth和裂纹扩展速率da/dt;然后,利用多元线性回归法对试验数据进行了曲线拟合,分别得到了断裂等寿命曲线和四参数全范围da/dt曲线公式的参数估计式;最后,将此公式运用于不同应力比下的裂纹扩展速率试验数据,拟合得到该材料四参数全范围da/dt曲线公式。
3.
Then the reliability method to determine fracture threshold value Δ K th is presented.
研究发现 :断裂门槛值ΔKth服从正态分
6)  PTHR
正门槛值
补充资料:槛槛
1.车行声。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条