1) polycrystalline diamond compact (PDC)
![点击朗读](/dictall/images/read.gif)
金刚石聚晶复合片
2) polycrystalline diamond compacts
![点击朗读](/dictall/images/read.gif)
聚晶金刚石复合片
1.
Residual stresses analysis of polycrystalline diamond compacts with different interface;
![点击朗读](/dictall/images/read.gif)
不同界面形态聚晶金刚石复合片热残余应力分析
2.
PDC bit was developed depending on the synthetic polycrystalline diamond compacts for cutting teeth during the 20th century.
PDC钻头是20世纪80年代研制出的一种以人造聚晶金刚石复合片为切削齿的钻头,能显著地提高钻井效率而且使用寿命长,在地质、油田钻井工程中获得了广泛的运用。
3) polycrystalline diamond compact
![点击朗读](/dictall/images/read.gif)
聚晶金刚石复合片
1.
Optimum design of functionally graded polycrystalline diamond compact;
![点击朗读](/dictall/images/read.gif)
梯度结构聚晶金刚石复合片组分优化设计
2.
Abrasion mechanism of polycrystalline diamond compact cutter turning granite
![点击朗读](/dictall/images/read.gif)
聚晶金刚石复合片车削花岗岩的磨损规律
3.
Residual thermal stress of functionally graded polycrystalline diamond compact was analyzed by the finite element method with ANSYS software.
利用Ansys有限元分析软件,对梯度结构聚晶金刚石复合片在制造过程中产生的残余热应力进行了分析,并与传统的双层结构金刚石-硬质合金复合片的残余热应力进行了对比。
5) PDC
![点击朗读](/dictall/images/read.gif)
聚晶金刚石复合片
1.
The researches and applications of polycrystalline diamond compacts(PDC) at home and abroad were presented.
介绍了国内外聚晶金刚石复合片(PDC)的研究与应用进展情况,阐述了PDC的合成方法和机理,并对PDC的耐热性能、PDC的强度、Co的均匀扩散以及金刚石表面石墨化和晶粒异常长大等问题进行了分析讨论,最后展望了PDC材料的发展趋势。
6) polycrystalline diamond compact(PDC)
![点击朗读](/dictall/images/read.gif)
聚晶金刚石复合片(PDC)
1.
The effect of thickness of diamond layer on the residual stresses in polycrystalline diamond compact(PDC) was investigated through XRD measurement and finite element analysis(FEA) method.
通过X射线应力测试和有限元分析相结合的方法,研究了金刚石层厚度对聚晶金刚石复合片(PDC)残余应力的影响,并根据实验测试结果推导出了PDC表面中心与边缘的应力随金刚石层厚度变化的关系式。
补充资料:聚晶金刚石钻头
聚晶金刚石钻头
polycrystalline diamond bit
Juling】l叩angshl zuantou聚晶金刚石钻头(polyerystalline diamond bit) 以聚晶金刚石或聚晶金刚石复合片作为切削刃具的钻头。它是20世纪80年代出现的新型钻头。由于聚晶金刚石的耐磨性比硬质合金高一到两个数量级,比天然金刚石的耐磨性还要高,扩大了切削破碎的使用范围,在石油钻井、地质勘探的岩芯钻中得到推广应用,有着十分广阔的前景. 聚晶金刚石是用微米级金刚石粉和硅等加催化剂在高温高压下聚结而成,通常做成2.smm大小的立方体或边长4mm厚2.smm的等边三角形。其耐热上限可达1200℃,有较高的韧性和极高的耐磨性,可作为切削破碎岩石的刃尖, 聚晶金刚石复合片,是在厚3~smm的钨钻硬质合金薄片的基底表面烧结一层厚度为0.5~lmm的聚晶金刚石,这种结构增强了聚晶金刚石的抗冲击能力,又便于焊接,常用的聚晶金刚石复合片可直接焊接在切削面上.复合片直径在12mm以下. (黄士芳)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条