1)  X-ray diagnostic machine
X射线诊断机
1.
In order to control the quality of X-ray diagnostic machine,non-intrusive X-ray tube voltage measurement system was designed according to the theory of radiation dosage testing.
为了实现X射线诊断机的质量控制,根据辐射剂量测量的原理,设计了非介入式X射线管电压测量系统。
2)  X-ray
X 射线
1.
This paper chose X-ray to detect logs and judged whether the logs had defects or not according to the intensity dif- ferences of the ray through the objects.
选择 X 射线作为检测源透射原木,根据检测透过被检物体后的射线强度差异,判断被检测原木内部是否存在缺陷和检测缺陷细节。
2.
X-ray real-time radioscopy imaging system can be used in many fields, such as medicine, industry non-destructive technology and baggage safety inspection in customs, airport, railway station,dock etc.
X 射线数字实时成像系统在医学、工业无损检测以及海关、机场、车站、码头的行包安全检查等领域得到广泛应用,X 射线图像传感器是其中的关键部件,现在用在X 射线实时检测领域的图像传感器大部分为电荷耦合器件CCD。
3.
objective: This study investigates the damage of myocardial cells induced by adriamycin or X-ray alone in cultured rat cardiac cells.
目的:分别研究了一定浓度阿霉素﹑一定剂量X 射线及阿霉素联合X 射线对体外培养乳鼠心肌细胞的损伤作用。
3)  XRD
X射线
1.
The microstructures of high modulus carbon fiber were investigated by using transmission electron microscope(TEM),high resolution transmission electron microscope(HRTEM),and X-ray diffraction(XRD),and they were further correlated to the mechanical properties of fibers.
利用透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和X射线衍射(XRD)研究了高模量炭纤维的微观结构,并将其与纤维的力学性能进行了关联。
2.
Two EG systems doped different oxidants were prepared by blended acid and characterized by expandable capacity and XRD.
通过混酸法制备了两种不同氧化剂体系的可膨胀石墨(EG),并采用膨胀容积和X射线(XRD)对EG进行了表征。
3.
The diamond films grown on the quartz glass were analyzed by XRD, Raman and XPS.
用X射线衍射、Raman谱和光电子能谱对石英玻璃上的金刚石薄膜进行分析 ,对于难用化学气相沉积在玻璃上生长金刚石薄膜的原因提出了一种解
4)  X-ray
X射线
1.
Automatic inspection of weld defects using X-ray image sequences;
基于X射线图像序列的焊缝缺陷自动检测方法
2.
Survey on X-ray Inspection System and Protection from Radiation at Fuzhou Airport;
福州机场X射线行李货物检查系统放射防护调查
3.
Investigation on Protection Condition of Medical Diagnostic X-ray Rooms in Yibin City;
宜宾市医用X射线机房防护状况调查
5)  X ray
X射线
1.
Evaluation of Sunface Layer Temperatyre by X Ray;
X射线法评估滚动接触表层平均温度
2.
The present status of X ray fluorescence spectrometry;
X射线荧光光谱仪的现状
3.
The energy spectral response of a kind of X ray converter;
一种X射线变像管能谱响应特性研究
6)  X-rays
X射线
1.
Influence of X-rays in Vacuum Interrupter on Human Health;
真空灭弧室中X射线对人体健康的影响
2.
Detection of DNA damage of Lewis lung carcinoma cells irradiated by carbon ion beam and X-rays with comet assay;
单细胞凝胶电泳技术检测碳离子束和X射线照射对Lewis肺癌细胞的DNA损伤
3.
Effect of X-rays on the Expression of VEGF in Cord Blood of Neonate;
X射线对新生儿脐血VEGF的影响
参考词条
补充资料:计算机X射线断层诊断仪


计算机X射线断层诊断仪
computerized tomog-raphy ,CT

  但对胸部和腹部检查因呼吸和肠姗动而效果不佳。第三代产品X线的扇面角度为300~45。,检测器300只,只作旋转扫描,扫描时间缩短为2.4~105,因之可做全身检查.第四代产品的主要目的是为了提高图像质合金制成,通常制成线材螺旋形、带材波形和线材波形三种形式(见表1).元件两端焊有截面积较大的引出棒,用来连接电源。这类加热元件在权化性气氛中的最高使用温度,视电热合金材质,在350~1400℃范围t,固定检测器达420~700只,仅X线球束管旋转扫描,时间进一步缩短为1~55。第五代产品是采用电子束扫描,电子束以高速进行3600旋转扫描,主要用于快速活动的器官如心脏等的检查诊断. CT扫描生成的数字化图像是以CT值表示的,它代表了人体各组织器官的X线吸收程度,以EMI单位或Hounsfield(H)单位表示,并设定水的CT值为。(H),骨骼的为+1000(H),空气的为一1000(H)。根据各部位较1电热合金加热元件的形状和尺寸关系┌──┬─────────┬────────────────────────────┐│种类│结构 │尺寸关系 ││ │ ├───────────────────┬────────┤│ │ │铁铬铝合金 │镶铬合金 │├──┼─────────┼───────────────────┼────────┤│线 │{哑叠 │h》Zd │ h)Zd ││材 │ │炉温<700℃:D=(7~10)d │D=(6~12)d ││螺 │ │ 700~1000℃:D=(6~8)d │ ││旋 │ │ )1000℃:D二(5~7)d │ ││形 │ │ │ │├──┼─────────┼───────────────────┼────────┤│带 │ I │ b___._____. │ r妻3a ││行 │几〕 │ “’言=5一15(一般取10) │ 平放炉底时: ││波 │ │ r=(4~8)口 │A=100~150 mm ││形 │ │ A(80a │ 挂在炉壁上时: ││ │ │ b___.__、.一._._.~ │A=200~300 mm ││ │ │ 当,一言>’“时,为防止高温时元件倒 │ ││ │ │伏,可加辅助挂钩或支撑 │ │├──┼─────────┼───────────────────┼────────┤│线 │央─┐ │S>3d │ S>3d ││材 ││} │ │A二150~250r。幻。 │A=200~300 rnr。 ││波 │└─┘ │ │ ││形 │ │ │ │└──┴─────────┴───────────────────┴────────┘的CT值,计算机可计算生成对应不同解剖结构的图像。 CT自安布罗斯和亨斯费德两人于1972年首先报告之后,在装置设计制造及临床应用等方面均获得迅速的发展。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。