1) Supported dense membrane
致密支撑膜
2) close timbering
密闭支撑
3) supported liquid membrane
支撑液膜
1.
On line supported liquid membrane enrichmentflow injection spectrophotometric determination of trace cadmium(Ⅱ) in water;
支撑液膜在线萃取富集-流动注射分光光度法测定水中痕量镉(Ⅱ)
2.
Research progress of stability of supported liquid membranes;
支撑液膜稳定性研究进展
3.
Extraction of the citric acid by supported liquid membrane;
支撑液膜法提取柠檬酸——膜配方的研究
4) supporting liquid membrane
支撑液膜
1.
The citric acid was extracted from citric acid solution by polypropylene supporting liquid membrane, and its mass transfer conditions in the technological process were studied.
用聚丙烯支撑液膜从柠檬酸溶液中提取柠檬酸,通过正交实验考察和分析料液相浓度、反萃取相浓度、搅拌速率、温度等因素的影响,得到最佳传质条件料液相浓度为0。
2.
The transferring behaviour of Cd(Ⅱ)ion through supporting liquid membrane was studied with porous polyproplylene membrane as supporting body and PC-88A/CHCl3 as carries;the effect of carries concentration,pH value,temperature and beginning concentration in feed phase etc.
本文以多孔聚丙烯膜为支撑体,PC-88A/CHCL3为膜载体,研究了重金属离子Cd(Ⅱ)的支撑液膜传输的行为。
5) supported liquid membranes
支撑液膜
1.
Application of ionic liquids in supported liquid membranes;
离子液体在支撑液膜中的应用
2.
Advances in separation mechanism , explanations for instability and methods for stability improvement in supported liquid membranes during the last thirty years were reviewed in this paper, and some researches on flue gas desulfurization(FGD) using this technology were also reported.
支撑液膜技术作为一种高选择性和高渗透性的膜分离技术得到了越来越多的应用。
3.
The losing behavior of liquid in supported liquid membranes(SLMs) was studied by electrochemical impedance spectroscopy(EIS) method in this paper.
采用电化学阻抗法研究支撑液膜膜液的流失行为,并采用等效电路法分析得到的交流阻抗图谱。
6) freestanding film
自支撑膜
1.
Preparation and characterization of polyimide freestanding films;
聚酰亚胺自支撑膜的制备及其表面形貌
补充资料：致密膜
分子式：
CAS号：
性质：又称致密膜。孔隙率小于10%、孔径为0.05～0.1μm的膜。这种膜的孔结构不能在电子显微镜下分辨，只能用间接的方法描述。为减少渗透阻力，一般将膜做得很薄(0.5～500μm)，称为超薄膜。非多孔膜有金属膜、玻璃膜和其他无机膜，以及聚合物膜。非多孔膜可制成平板和中空纤维。
CAS号：
性质：又称致密膜。孔隙率小于10%、孔径为0.05～0.1μm的膜。这种膜的孔结构不能在电子显微镜下分辨，只能用间接的方法描述。为减少渗透阻力，一般将膜做得很薄(0.5～500μm)，称为超薄膜。非多孔膜有金属膜、玻璃膜和其他无机膜，以及聚合物膜。非多孔膜可制成平板和中空纤维。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条