1) microimprint
微压印
1.
Research on heat transfer and experiment for microimprint of polymeric microfluidic chip is a key component of national 863 project named the micro-mould fabri.
微压印聚合物微流控芯片的传热模型及实验研究课题是国家863项目《面向微流控芯片的微模具制造装备研究》的重要组成部分(项目编号:2002AA42115)。
2) nanoimprinting
微纳米压印
1.
To fabricate micro/nano structures on a large-format substrate,a novel miro-area micro/nanoimprinting lithographic system was presented,and the design of this imprinting system was introduced.
为了实现在大幅面基底上制作微纳结构,开发了一种新型的分布微区微纳米压印技术和相应的设备。
3) micro-contact printing(μCP)
微接触压印(μCP)
4) indentation
[英][,ɪnden'teɪʃn] [美]['ɪndɛn'teʃən]
印压
1.
To investigate feasibility of assessing passive mechanics properties of myocardium using ultrasound indentation apparatus and to lay foundation on assessing directly them in vivo,isolated canine myocardium is compressed by cyclic loading-unloading with the apparatus.
为了探讨介入超声印压系统检测心肌被动力学属性可行性,为活体检测提供基础。
2.
Up to now, ultrasound indentation technique has been widely used for assessing for the stiffness of tissue including residual limbs, diabetic feet, fibrotic neck induced by radiotherapy, spinae , and articular cartilage, which indicated that the technique can provide a quantitative measurement of tissue stiffness.
应用超声印压(Ultrasound indention,US indention)方法,已成功检测了糖尿病人足底、残肢、放射治疗前后颈部、脊柱、关节软骨等组织的硬度变化,表明用该法可定量检测因组织病变而引起力学特性改变。
6) Imprinting
[英][im'print] [美][ɪm'prɪnt]
压印
1.
Design of the PLC Controlling Imprinting Machine for Polymeric Microfluidic Chip;
PLC控制的聚合物微流控芯片压印机设计
2.
Automatic imprinting machine for polymeric microfluidic chips is a main part of the 863 project named the micro-mould fabrication equipment of microfluidic chips (item number: 2002AA42115), which aims to develop an automatic system for the imprinting and bonding of polymeric microfluidic chips.
全自动聚合物微流控芯片压印机课题是国家863项目《面向微流控芯片的微模具制造装备研究》的重要组成部分(项目编号:2002AA42115)。
补充资料：固定斜管微压计
分子式：
分子量：
CAS号：
性质：一种简单的微压计。主要由容器和固定斜管构成。当测量正压力时，需要测量压力的空间与容器接通，而当测量负压力时，则与斜管接通。当测量压力差时，将较高的压力与容器接通，而将较低的压力与斜管接通。所求的微压或压力差可由斜管的倾斜角度α、管内液面升高度h1和容器内液面下降度h2等算出，一般将h2忽略，由h1直接读出。如斜管倾斜角度可以改变，则称可动斜管微压计（movable-inclined-tube micromanometer）。
分子量：
CAS号：
性质：一种简单的微压计。主要由容器和固定斜管构成。当测量正压力时，需要测量压力的空间与容器接通，而当测量负压力时，则与斜管接通。当测量压力差时，将较高的压力与容器接通，而将较低的压力与斜管接通。所求的微压或压力差可由斜管的倾斜角度α、管内液面升高度h1和容器内液面下降度h2等算出，一般将h2忽略，由h1直接读出。如斜管倾斜角度可以改变，则称可动斜管微压计（movable-inclined-tube micromanometer）。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条