2) 3-D profile
三维形貌
1.
This method combines fringe projection method and digital image correlation method into one optical system,which is a novel method for measuring 3-D profile and out-of-plane displacement of micro structures.
该方法是栅线投影法和数字图像相关方法相结合的产物,用于测量微结构的三维形貌和离面变形。
3) three dimension forming
三维成形
4) 3-D topography
三维形貌
1.
Using 3-D topography measurement of microelectronics substrate as the background,this paper studied the mechanism and method of accurate measured mechanical quantity through Moiré fringe,which provided a non-contact,high-speed and high-accuracy measuring technique for the microelectronics substrate and for other information products(like shadow mask).
以微电子基板的三维形貌测量为背景,研究了莫尔条纹精细测量机械量的机理与方法。
5) three-dimensional morphology
三维形态
1.
In this paper, three-dimensional morphology of grain boundary and intragranular ferrite and the relations between intragranular ferrite and inclusions in an Fe-0.
48%Mn低碳微合金钢中晶界、晶内铁素体的三维形态以及晶内铁素体与夹杂物之间的关系。
6) 3D topography
三维形貌
1.
The results show that a three-dimensional topography(3D topography) of pearlite can not only be observed,but a clear judgment about the orientation of the lamella pearlite can be achieved as well.
结果表明,AFM不仅能清晰地给出珠光体团片层间距的三维形貌,还能够观察到片层取向。
2.
The system was made up of some measuring modules constituted by sensors to inspect 3D topography of different work faces of the BWS.
研究基于视觉检测原理的承载鞍磨耗尺寸自动检测系统,采用立体视觉结合结构光投射技术设计了测量传感器,由传感器组成测量组件,每个测量组件可以测得承载鞍一个磨耗面的三维形貌,多个测量组件构成完整的检测系统,同时测量承载鞍各个复杂磨耗面实际三维形貌,由此计算得到相关磨耗尺寸。
补充资料：鞍鼻整形
分子式：
CAS号：
性质：由医用级硅橡胶模压而成有船形、L形的肉红色的长期植入物。分大、中、小3种不同规格，用于先天性鞍鼻、鼻腔疾病和外伤所致的鞍鼻、鼻骨发育不良所致的鼻尖补缺者的填充整形，也有压制成板，由医生在整形手术时自行雕刻而成。也有用于巩膜垫压以使患者恢复视力的医用硅橡胶制品，有硅橡胶泡沫条、硅橡胶条等，前者用于勿需永久性巩膜垫压，后者用于广泛性脱离和永久性垫压，形状有片、圈、条等多种，视患者病情由医生选定。
CAS号：
性质：由医用级硅橡胶模压而成有船形、L形的肉红色的长期植入物。分大、中、小3种不同规格，用于先天性鞍鼻、鼻腔疾病和外伤所致的鞍鼻、鼻骨发育不良所致的鼻尖补缺者的填充整形，也有压制成板，由医生在整形手术时自行雕刻而成。也有用于巩膜垫压以使患者恢复视力的医用硅橡胶制品，有硅橡胶泡沫条、硅橡胶条等，前者用于勿需永久性巩膜垫压，后者用于广泛性脱离和永久性垫压，形状有片、圈、条等多种，视患者病情由医生选定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条