1) connexin43
间隙连接蛋白基因Cx43
1.
[Object] To investigate expression of connexin43(Cx43) andE-cadherin (E-cad) in Laryngeal carcinomas and its relationship with the biological behavior.
目的：研究间隙连接蛋白基因Cx43(Connexin43)和E-钙粘附素(E-cadherin)在喉癌组织中的表达与其生物学行为的关系，探讨喉癌发生、发展的机制。
2) Clearance
间隙
1.
Measurement of tiny-size clearance based on CCD image measurement;
基于CCD图像检测的微间隙精密测量系统
2.
Study of computer control system of reverse roll coating clearance;
逆转辊涂布间隙的计算机控制系统研究
3.
Study on the Dynamics of Rigid Multibody with Clearance of Virtual Axis Hybrid Polishing Machine Tool;
虚拟轴混联研抛机床含间隙多刚体动力学研究
3) gap
间隙
1.
Influence of gap on stud penetration welding process and its countermeasures;
间隙对栓钉穿透焊过程的影响及其对策
2.
Study on vision measurement system for gap of welding joint and torch position;
接头间隙及焊枪位置偏差视觉检测系统研究
3.
Influence mechanism of feeding servosystem with gap nonlinearity on profile machining errors;
具有间隙非线性的伺服进给系统对轮廓加工误差的影响机理
4) backlash
间隙
1.
Analysis of torsional vibration on rougher of rolling mill considering the backlash;
考虑间隙时粗轧机主传动扭振分析
2.
The Backlash Adjustment Moment Analysis on Double Cycloid no Backlash Steel Backlash Steel Ball Trausmlssion;
双摆线无隙钢球传动间隙调节力矩分析
3.
Identification of Nonlinear Systems With Backlash Characteristics;
一种具有间隙特性的非线性系统的辨识方法
5) clearances
间隙
1.
Contact-impact model and its discrete schemes for revolute pairs with small clearances;
微小间隙转动副的接触碰撞模型及离散算法
2.
Based on the theory of contact dynamics,the dynamic model with clearances of sizing press roll was established using the method of numerical simulation.
基于接触动力学的理论,利用数值模拟的手段建立了调宽机含间隙的动力学数学模型,采用定步长四阶Runge-Kutta数值积分的方法,详细研究了运动副内间隙对接触力的影响规律。
3.
Based on the classical clearances description of Newton-Euler and two state motions,this paper developed a new theory of creating the complex models of mechanism clearances.
基于牛顿欧拉方程和二状态运动的机构间隙模型,提出了一种建立机构间隙复合模型的新方法。
6) interval
间隙
1.
Simultaneously cutting the punch and matrix and interval calculation;
线切割一次成形凹凸模及间隙计算
2.
In order to reduce the difference of stress level of sabot dedendum surface remarkably and the stress of dangerous dedendum surface greatly,interval meshing technology was applied to the composite sabot of high power armor piercing projectiles.
为有效地降低复合材料弹托发射过程中齿根面应力水平的差异,将啮合间隙技术应用于大威力穿甲弹的复合材料弹托上,给出了间隙啮合技术应用的一般步骤和方法。
3.
Several questions in the project which is used of the interval meshing technology has been analysed in this pa- per.
文中分析了间隙啮合技术在工程应用中的几个问题,即弹托外形对弹托齿根面的应力的影响和推力面位置对啮合间隙分布方式的影响,文中所做的工作丰富和完善了间隙啮合技术,解决了间隙啮合技术在工程应用中的一些技术问题,所得结果对工程应用具有指导意义。
参考词条
补充资料：龙井43(Longjing 43)
| 龙井43(Longjing 43) 茶树无性系品种之一。从龙井茶树群体品种中单株选育而成。 灌木型、中叶类、早生种。植株较矮，从根颈处分枝，枝叶繁藏。树姿半开张，分枝密度极大。叶枝上斜，叶片呈椭圆形，叶尖钝，叶面隆起，叶色深绿，富光泽，叶较厚，叶质较软。侧脉明显，锯齿细匀，叶缘微波。芽平均长1.58cm，一芽三叶平均长5.05cm，芽粗壮，茸毛中等，嫩叶背卷，色黄绿，在芽柄上泛有红斑，育芽力强。叶层厚，新梢密度很高，在青壮期每0.333平方米有芽1025个。开花结实力一般。扦插成活率高，抗寒性强，适应性广，耐采性强。春茶一芽二叶化学成分含量为：氨基氮4.5mg%，儿茶素116.24mg/g，咖啡碱4.42%，茶多酚19.18%。适制龙井茶和其他绿茶。制成龙井茶，外形挺秀，香高持久，具有狮峰龙井的风格。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。