1) cooling velocity
凝固速
2) solidification rate
凝固速度
1.
The percentage of RE in the matrix increases with the increase of solidification rate; the carbides in directional solidification microstructure are refined by RE added in high chromium cast iro.
研究表明,稀土主要位于高铬铸铁的基体组织中,随凝固速度的增加,稀土在基体中的含量增加;稀土对高铬铸铁定向凝固组织中的碳化物具有细化作用,并随凝固速度的增加,定向凝固高铬铸铁组织细化程度提高,同时稀土的加入使高铬铸铁的抗拉强度明显提高。
2.
The microstructure and its evolution of directionally solidified Cu-Cr alloy were investigated under the condition of different solidification rates,by use of optical microscope and SEM.
在高梯度定向凝固装置上制备Cu-1·0%Cr(质量分数)合金,用金相显微镜、扫描电镜进行微观组织的观察,研究定向凝固速度对Cu-Cr合金微观组织形貌的影响。
3.
5Cr) with different solidification rate has been obtained,and the effect of solidification rate on the eutectic microstructure of high chromium cast iron has been studied.
采用液态金属冷却的定向凝固技术,获得了在不同凝固速度下的高铬铸铁(Fe-3。
3) solidification rate
凝固速率
1.
The empirical results indicate that the increase of solidification rate can achieve intermetallic particles reinforced phase with ideal morphological features in Al-Ni alloy.
实验结果表明,提高凝固速率可以使Al-Ni合金获得理想形貌的金属间化合物强化相。
2.
Exporimental results show that the stress- rupture life of DZ22 at 980℃ and 220 MPa was increased from 71 hours and 50 nunutes to 168 hours and 5 minutes at relatively high solidification rate.
本文采用ＺＭＬＭＣ超高梯度定向凝固法（ＺＭＬＭＣ法），研究了两种凝固速率下ＤＺ２２合金的高温力学性能和组织。
3.
The dendritic arm spacings and microsegregations of directionally solidified superalloy DZ22 at various solidification rates have been studied with the help of a ZMLMC directional solidification equipment.
采用新研制的超高梯度定向凝固装置，研究了不同凝固速率下定向凝固高温合金ＤＺ２２的枝晶臂间距和枝晶偏析。
4) solidification rate
铸造凝固速度
1.
The influences of the solidification rate on microstructure and performances of Mg- Hg- X alloy anodes have been studied by metallography, electrochemical testing and SEM.
以Mg-Hg-X合金为研究对象,利用金相显微镜、扫描电子显微镜、电化学测试仪等研究了不同铸造凝固速度对镁合金阳极经混合酸侵蚀后显微组织、电化学性能和腐蚀速率的影响。
5) coagulation
凝固
1.
The effect of different coagulation methods on the mechanical properties of skin rubber;
凝固方法对胶清橡胶力学性能的影响
2.
Study on the coagulation of natural rubber using surfactant and calcium as the coagulant;
表面活性剂和CaCl_2作凝固剂凝固天然胶乳的研究
3.
Effect of coagulation and drawing condition on structure and morphology of PAN fiber;
凝固与拉伸条件对PAN纤维结构形态的影响
6) solidify
凝固
1.
By this model the time required for casting pipe solidification,thickness of solidifying layer,solidification depth and the difference of solidification rate between inner and outer walls can all be.
通过理论推导，建立了连续铸铁管凝固过程传热微分方程，用差分法求解取得了满意结果，最后用最小二乘回归求出固液界面的等温线方程。
2.
By researching the influence of copper plate shape,copper plate coming,,cooling structure of funnel mould on the solidify of thin slab and the heat transfer of mould,we analyzed the productive adaptability of H~2 funnel mould of Danieli,and optimized the shape of mould copper plate.
通过研究漏斗型结晶器的铜板形状、镀层、冷却结构对薄板坯凝固过程和结晶器传热的影响,分析了达涅利 H~2漏斗型结晶器生产应用的适应性,并据此对结晶器宽面、窄面铜板形状进行了优化。
参考词条
补充资料：笃速速
1.亦作"笃簌簌"。 2.战抖貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。