1) coating composite
涂层复合
2) composite coating
复合涂层
1.
Realization of laser cladding and crack-free ceramic-metal composite coatings;
金属陶瓷复合涂层的激光熔覆与无裂纹的实现
2.
Microstructure and Properties of Sparking Deposited Composite Coating on Electrode Surface;
点焊电极表面电火花沉积复合涂层的组织和性能
3.
Non-isothermal crystallization kinetics of flame sprayed polyamide 1010/nano-ZrO_2 composite coating;
火焰喷涂PA1010/nano-ZrO_2复合涂层的非等温结晶动力学
3) coating
[英]['kəʊtɪŋ] [美]['kotɪŋ]
复合涂层
1.
Electrochemical impedance spectroscopy of inorganic/organic composite coatings in 3.5%NaCl solution;
无机/有机复合涂层体系在3·5%NaCl溶液中的EIS
2.
On the properties of nylon 1010/nanometer TiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米TiO_2复合涂层力学性能研究
3.
On the properties of nylon 1010/nanometer SiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米SiO_2复合涂层的力学及老化性能
4) compound coating
复合涂层
1.
A study on the hydroxyapatite/bioglass compound coating;
羟基磷灰石/生物玻璃复合涂层的研究
2.
The compound coating sample was obtained through the combination process of BaTiO_3 and ITO powders by using different agglomerants,after an ultrasonic dispersion process.
采用多种胶粘剂,将纳米吸波剂BaTiO3粉体与ITO颜料粉末经超声分散后复合到玻璃基片上获得复合涂层样品。
3.
The preparation, research means and functional property of the functional nano compound coating were introduced.
介绍了纳米功能复合涂层的制备方法、研究手段及功能特性。
5) composite coatings
复合涂层
1.
Effect of nitrogen protective atmosphere on microstructure and high temperature erosion property of TiAl_3 and Cr_3C_2 composite coatings;
N_2保护对TiAl_3和Cr_3C_2复合涂层组织结构及高温冲蚀性能的影响
2.
Study on TiC reinforced Fe matrix composite coatings by reactive flame spray;
反应火焰喷涂TiC/Fe复合涂层显微结构研究
3.
Effects of thickness and environmental factors on conductivity of composite coatings;
厚度和环境对复合涂层导电性能的影响
6) composite coat
复合涂层
1.
To improve the wear resistance of mechanic parts used in the heavy loaded condition, the composite coats were made by laser cladding on the surfaces of 45 steel samples.
以微米和纳米12％Co-WC颗粒为增强相,自熔合金粉末Ni60B为粘结剂,采用激光熔覆的方法在45钢表面制备出微-纳米WC增强Ni基合金复合涂层;在MM200磨损试验机上与硬质合金磨轮进行了不同载荷和距离的干磨损试验。
补充资料：生物碳涂层复合材料
分子式：
CAS号：
性质：低温裂解碳又称各向同性碳，是将烃类气体在高温下炭化，可以直接蒸镀在人工关节的运动磨损表面，作为减磨涂层；也可直接蒸镀到金属制的人工骨或石墨制碟型人工心脏瓣膜的表面上，作为抗凝血涂层。这种蒸镀涂层还可以掺入硅元素，例如人工关节帽可用石墨为基材，成型后用沸腾沉积法涂上含硅的热解碳，具有高强度和耐磨损性能。在碳纤维毡上沉积上述碳涂层，可用于颌面修复。
CAS号：
性质：低温裂解碳又称各向同性碳，是将烃类气体在高温下炭化，可以直接蒸镀在人工关节的运动磨损表面，作为减磨涂层；也可直接蒸镀到金属制的人工骨或石墨制碟型人工心脏瓣膜的表面上，作为抗凝血涂层。这种蒸镀涂层还可以掺入硅元素，例如人工关节帽可用石墨为基材，成型后用沸腾沉积法涂上含硅的热解碳，具有高强度和耐磨损性能。在碳纤维毡上沉积上述碳涂层，可用于颌面修复。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条